MOULDS DESIGN AND PROCESSING HAND BOOK
What is Mould ?
Size of the Mould
What is Hot Runner Mould?
What is the Classification of Mould?
What are the elements of Mould ?
Non Self Degating two Plate Mould
Three Plate Injection
Insulated Runner Mould
CLASSIFICATION OF MOULD
Hot Runner Mould
What is Gate? What are the Types of Gate?
What is Classification of Moulds
Distinction of Moulds According to Primary Design Features
Criteria Leading to a Characteristic Mould Designation
What is the Roll of Feed System- Sprue and Runner?
Types of Runner Layout
Factors Affecting Runner System
Demands of Runner System
Functions of Runner
Cross Sectons of Runners
Balanced Runner System
What are the Limitions of the Gate?
VENT IN THE MOULD
What is Vent in the Mould
Gates - Classification
Different Types of Gates
Application of Various Types of Gate
Cross - Section of Gate and their Position Relative to Runner
What is the Significance of Wall Thickness of Part?
What is the Significance of Cooling System in the Mould?
What are the Design Considerations for Cooling System in the Mould?
What is the Importance of Mould Temperature Control
What are Factors influencing Uniformity of Mould Surface Temperature?
How Does heat Exchange Take Place in the Injection Mould?
Cooling System in Moulds-Design
Cooling System for Flat Parts
How Does the Ejection Mechanism Work?
What are the other Types of Ejector Mechanism?
Ejection in three Plate Mould
What is Core-Pull Mechanism? How Does it Work
Basic Steps for Mould Design
Check List for a Turnkey Mould project
Injection Mould Specification Sheet
Work Sheet for Selection of Steel for mould
Types of Demoulding
Type of Finish
Machine Specifications Recommended
Auality Check List
PRODUCTION SCHEDULE OF PLASTIC INJECTION MOULD
Details of Job- Order for Moulding Shop
STEEL FOR INJECTON MOULD
What are the factors to be Considered While Selecting Steel for Injection Mould?
What are the Essential Characteristics Desired in Mould Steel?
Nominal Chemistries for Plastic Mould Steels
What steel is recommended for core and cavity?
Application of Mould steel
what are the Mechanical Design Factors to be considered for Injection Mould ?
TROUBLE SHOOTING TIPS
Property Comparision of Popular Mould Steel
heat Treatment of Plastic Mould Steels
How can we ensure good performance for the Mould?
PROPERTIES OF PLASTICS
Properties of Plastics
Mould Steel for Plastics ability of Steel on heat Treatment
Data on Mould Surface Treatments
Properties of Steel heat Treatment
Effect of Alloying Elements in Steels used for Mould Making
Tooling Materials Recommended for Various Plastics processes
Mould Materials and its Applications
Spectrum of material used in building
Moulds- Arranged in order of Surface Hardness
List of Mould Parts and Corresponding Steels to be used
Mould Finish Characteristics
Typical Applications for Steels in Injections Moulds
Applications for the Typical Mould Steels
Alloy Steels Used in Mould Making
Stainless Mould Steels Identifying Elements
Precipitation Hardening Steels used in Mould Making
Bismuth- Tin Alloys (Cerro Alloys) for Injection Mould
Cast Steels for Injection Moulds, Composition- Treatment-Properties
Technical Data of Beryllium- Copper Alloys
Blow Mould Tools Materials
Properties of Blow Mould Material
Mould Materials- Equivalent Standards
High-Grade Zinc Alloys for Injection Moulds
General Recommendations on Steel for Core/Cavity Inserts
Aluminium Alloys for Injection Moulds
INJECTION MOULD DESIGN
Determination of Number of Cavities based on the Machine Capacity(Technological Method)
Election of the Injection Moulding Machine
The Design of Runner
Runner Diameters for Unifilled Material
Pressure Drop in Runner System
Strength of Cavity
Determination of Support Pillar Requirements
Strength of Guide Pillars
Thermal Properties of Plastics
Thermal Conductivity of Plastic and metals Details
Recommended Fits Used in Injection and Compression Mould
O-Ring Fitting Details for Sealing a Curved Surface
O-Ring Fitting Details for Sealing a Flat Surface
Force Required in Ejection
COMPRESSION AND TRANSFER MOULD-POT CALCULATIONS
Selection Moulding Method-Compression or Transfer
Economic Determination of the Number of Cavities in Moulds
BLOW MOULD DESIGN ASPECTS
Blow Moulding Temperatures and Pressures
Tolerance Guidelines for Blow Moulded parts
Properties of blow Mould Materials
Recommended Blow Mould Tool Material and their properties
Recommended Mould Shrinkage Value for Different Plastic Materials
Other Parameters Related to Blow Mould Design
Effect of Shear Rate on Die Swel of Various Thermo Plastic
Typical Blow Moulder Size and Capacity
Standard Mould parts
STANDARD MOULD PARTS
Engineers India Research Institute (EIRI) is a renowned name in the industrial world for offering technical and financial consultancy services.
EIRI services are:
Detailed Feasibility Reports
New Project Identification
Project Feasibility and Market Study
Identification of Lucrative Industrial Project Opportunities
Preparation of Project Profiles / Pre-Investment and Detailed Feasibility Studies,
Market Surveys / Studies, Market Survey Cum Detailed Techno-Economic Feasibility Reports
Project Reports in CD Roms
Identification of Plant /Process/Machinery and Equipment, Industrial General Guidance for setting up new industrial projects.
Our most up-to-date and Technologically Advanced Industrial Project Reports, categorized with respect to Financial Outlays and Sector – wise Classification are immensely useful for :
Existing Small or Medium Scale Industrialists facing competition from large houses
Young Entrepreneurs dreaming to start their own industrial enterprise
Young Graduates and Professionals wishing to begin their career
Industrialists interested in Debottlenecking their capacities & New Product – Lines
Large Industrial Houses pursuing Expansion, Growth and Diversification Plans