Making of EVA (Ethylene Vinyl Acetate) Injection moulding is a new development in rubber formulations. For the compounding purposes, for EVA, rubber products, among the other ingredients, Pilene EVA 1802 constitutes a conspicuous are along with other rubber ingredients viz. SBR 1958 and natural rubber. Polyolefins Industries Ltd. now manufactures ethylene vinyl acetate copolymer (EVA) in India and is also available for the rubber footwear manufacturing industry as PILENE EVA. Pilene EVA can be used for footwear, capable, hot melt adhesives, wax modifiers, blends with bitumen, noise absorber, injection moulding, films, masterbatches, additives as weather resistant ingredient, etc. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1000 KGS/Day

Land & Building (450 sq.mt.) Rs. 26 Lacs

Plant & Machinery Rs. 1 Cr.

W.C. for 3 Months Rs. 1.46 Cr.

Total Capital Investment Rs. 2.94 Cr.

Rate of Return 37%

Break Even Point 42%

***************************************************

Ready Mixed Concrete, or RMX as it is popularly called, refers to concrete that is specifically manufactured for delivery to the customer’s construction site in a freshly mixed and plastic or unhardened state. Concrete itself is a mixture of Portland Cement, water and aggregates comprising sand and gravel or crushed stone. In traditional work sites, each of these materials is procured separately and mixed in specified proportions at site to make concrete. Ready Mixed Concrete is bought and sold by volume-usually expressed in cubic meters. RMX can be custom-made to suit different applications. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 Cu.mtrs./Day

Land & Building (8000 sq.mt.) Rs. 92 Lacs

Plant & Machinery Rs. 2.46 Cr.

W.C. for 3 Months Rs. 2.13 Cr.

Total Capital Investment Rs. 5.58 Cr.

Rate of Return 13%

Break Even Point 69%

******************************************************

Match is a splint of wood, cardboard, or other material provided with a combustible tip which ignits by friction, widely used for obtaining fire. The development of the safety match followed soon after the discovery of red phosphorous in 1845. The ingredients for combustion are distributed between the match head and the striking surface, usually painted on the container & the match is uneffective without the container. When stuck against the prepared surface, the heat produced by the ignition of the minute amount of red phosphorous is sufficient to ignite the match head. The wood or cardboard splint is coated with paraffin to sustain a steady flame and it is impregnated with ammonium phosphate or boric acid to arrest after glow. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 9600 PKT/Day

Land & Building (1500 sq.mt.) Rs. 57 Lacs

Plant & Machinery Rs. 5 Lacs

W.C. for 3 Months Rs. 24 Lacs

Total Capital Investment Rs. 89 Lacs

Rate of Return 70%

Break Even Point 27%

*******************************************************

The term power plant is often used loosely to designate plant in which electricity is generated through different means like Hydro, Neuclear, Bio Gas etc. and the term power generation in the engineering sense implies transformation of Mechanical energy into electrical energy. Per Capita Power Consumption is a barometer of Country’s prosperity, economic growth and industrialization. Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10 MW

Land & Building (10 Acres) Rs. 3.25 Cr.

Plant & Machinery Rs. 6 Cr.

W.C. for 3 Months Rs. 1.98 Cr.

Total Capital Investment Rs. 12.12 Cr.

Rate of Return 34%

Break Even Point 49%

*******************************************************

Foodgrains that are produced need to be stored and protected from pests. Duly supported by adequate pest control measures, millions of toones of food grains representing the buffer stock are warehoused under scientific methods. A major breakthrough is the paramount achievement by the food corporation of India. A protection measures include fumigation operation. In India, foodgrains are stored largely in bags either in covered godowns or intransient cover and plinth (CAP) storage by commercial agencies. For the control of insect pests, fumigation with phosphine has become more popular and prevalent as compared to either fumigants. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1 MT/Day

Land & Building (1000 sq.mt.) Rs. 59 Lacs

Plant & Machinery Rs. 31 Lacs

W.C. for 3 Months Rs. 1.14 Cr.

Total Capital Investment Rs. 2.24 Cr.

Rate of Return 28%

Break Even Point 53%

***************************************************

Toughened glass is a type of soda-lime-silica glass with a sheet thickness 4-12 mm. The sheet has a central tensile stress of 500-1200 kg/cm2 and a ratio of surface compressive stress to central tensile stress of 2:1 to 4:1. The article is toughened by heat exchange with an oil (or chilled air) in which these is maintained from 0.01 - 0.07 % liquid. The boiling point liquid may be an organic liquid such as carbon tetrachloride, methanol, benzene, toluene, trimethyl alcohol, ethyl alcohol or Xylene etc. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1300 sq.mt./Day

Land & Building (4 Acres) Rs. 1.69 Cr.

Plant & Machinery Rs. 91 Lacs

W.C. for 2 Months Rs. 2.71 Cr.

Total Capital Investment Rs. 5.70 Cr.

Rate of Return 40%

Break Even Point 42%

***************************************************

Industrial Investment Promotion Assistance would be given to the Food Processing. Industry having a fixed capital investment below Rs. ten crore. Mandi fee for purchasing agriculture produce as raw material would be exempted for the food processing units to be set up in the food park. The food processing units working as seasonal units to be set up in the food parks would be declared as seasonal industries and be given relaxation in labour laws.They would also be given exemption from the traffic related to minimum power bills. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Land & Building (30 Acre) Rs. 10.33 Cr.

Plant & Machinery Rs. 3.07 Cr.

W.C. for 3 Months Rs. 1.26 Cr.

Total Capital Investment Rs. 15.98 Cr.

Rate of Return 26%

Break Even Point 56%

***************************************************

The Guar legume Plant is extremely drought resistant and thrives in semi arid regions where most plants perish. Guar grows best in sandy soils, areas of West, North West India and Parts of Pakistan are the ideal places for its farming. However with the latest technologies in the agriculture, it is now a days grown in the many states of India. Jodhpur City in the north western state of Rajasthan in India is the most important and ideal processing center for Guargum and contributes about 40 % of the worlds’ Guargum supply. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 30 Tons/Day

Land & Building (1 Acre) Rs. 1.06 Cr.

Plant & Machinery Rs. 1.02 Cr.

W.C. for 2 Months Rs. 5.37 Cr.

Total Capital Investment Rs. 5.64 Cr.

Rate of Return 45%

Break Even Point 36%

*****************************************************

Leather goods is a generic term covering many many distinct products exceeding 200 of leather and non-leather, serving personal comfort and material care. The accepted trade and technical include four groups viz. small leather goods, solid leather goods, ladies hand bags and belts. Saddlery gloves, garments industrial leather products sports goods leather artware toys constitute each as a separate group. Increased national and international travel, population urbanization, growth of corporate sector, change of the occupational pattern, swelling of two pay cheque homes, increased purchasing power and fashion contribute for the growth of leather goods and leather garment industries. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 550 Nos/Day

Land & Building (500 sq.mt.) Rs. 14 Lacs

Plant & Machinery Rs. 3 Lacs

W.C. for 3 Months Rs. 18 Lacs

Total Capital Investment Rs. 36 Lacs

Rate of Return 177%

Break Even Point 22%

*****************************************************

Pigs are valuable source of rich animal protein at a low cost, particularly in thickly populated countries like India. They excel all other farm animals in respect of edible flesh of high nutritive value for the small investment made on them. Pig industry contributes substantially to the nations economy in many Western country and to great extent in India where pork and pork products from 5 per cent of the total meat production. Pig meat is however not so popular as goat meat with the people considering the conditions under which pigs are maintained. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5 MT/Day

Land & Building (5 Acres) Rs. 3.48 Cr.

Plant & Machinery Rs. 44 Lacs

W.C. for 1 Months Rs. 52 Lacs

Total Capital Investment Rs. 4.89 Cr.

Rate of Return 33%

Break Even Point 60%

******************************************************

Iron Ore Pellets are used in blast furnaces for producing sponger iron & steels. Marked by high productly lower fuel consumption and improved furnace control, pellets are now preferred all over the world for primary steel making. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 20 MT/Day

Land & Building (2 Acres) Rs. 1.36 Cr.

Plant & Machinery Rs. 1.74 Cr.

W.C. for 3 Months Rs. 1.81 Cr.

Total Capital Investment Rs. 5.22 Cr.

Rate of Return 22%

Break Even Point 58%

*****************************************************

The demand for buffalow processed meat is increasing in some communitities. Since India is a country of Hidus,Muslims, Christians and sikh etc. Hindu do not prefer to take buffalo meat. But buffalo meat is usually used by Muslims, sikhs,and christians. As per consus of India their population is increasing at an average rate of 2.1% per year. Accordingly, the demand for buffalo meat is likely to increase in future. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 30 Ton/Day

Land & Building (7000 sq.mt.) Rs. 1.77 Cr.

Plant & Machinery Rs. 2.86 Cr.

W.C. for 1 Months Rs. 3.27 Cr.

Total Capital Investment Rs. 8.54 Cr.

Rate of Return 58%

Break Even Point 35%

****************************************************

It is seen at most places that a Dairy Farmer is not aware of the economics of his day to day business. This is because Dairy has been a traditional form of business, which is being carried on by generations together. The pattern particularly of the feeding & watering has been quite the same for a long time. It is commonly seen that most of the Farmers who keep animals for Milk have very little or NO idea about the expenses (per day) invloved in raising the animals. It is interesting to note that the farmer is even unaware of the fact that the feeding cost of his animal comprises of more than 80% of the total cost of raising the animals. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 700 Lts./Day

Land & Building (1 Acre) Rs. 26 Lacs

Plant & Machinery Rs. 18 Lacs

W.C. for 1 Months Rs. 3 Lacs

Total Capital Investment Rs. 65 Lacs

Rate of Return 11%

Break Even Point 75%

****************************************************

Perforated metal sheet is made by punching machines. Perforated Metal is one of the most versatile products on the market today. Widely used in the architectural, engineering, building, agricultural, nuclear power, food processing, and petrochemical industries. It can be made in a range of round, square, slotted or decorative patterns. The round hole perforation is the most popular type of perforated pattern used and is manufactured in coils or sheets. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 300 KGS/Day

Land & Building (500 sq.mt.) Rs. 18 Lacs

Plant & Machinery Rs. 23 Lacs

W.C. for 2 Months Rs. 52 Lacs

Total Capital Investment Rs. 99 Lacs

Rate of Return 31%

Break Even Point 52%

*****************************************************

A Veterinary college in meant to impart education of Veterinary Sciences to students to qualify them as VET doctors in different specialized disciplines so as to treat animals suffering from various ailments. Normally a Veterinary college is associated with a hospital. Veterinary Science which encompasses animal health and husbandry. The animal is not considered as mese wealth or an object of benefit but also as a co-existent of the planet. It is therefore marks a distinct transformation of concept from earlier era. The sentimental and Biolagical undertone rather than the commercial or materiolistic out look prevailed during Ashokan era. Whether in production practice or companionship the importance of animal care in the message cannot be undermined, compassion is the key ti hospital and husbandry practice. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 Students/Annum

Land & Building (55 Acres) Rs. 18.13 Cr.

Plant & Machinery Rs. 14.52 Cr.

W.C. for 3 Months Rs. 1.22 Lacs

Total Capital Investment Rs. 38.72 Cr.

Rate of Return 33%

Break Even Point 47%

********************************************************

Loss of fluid and loss of pressure in hydraulic and preumatic devices are prevented by the proper design and use of seals, packagings and gaskets. Seals fall in two major classes: (1) Static and (2) Dynamic. Static seals or gaskets are used to prevent the flow of fluid across a static joint between two parts of a pressure vessel. For example the gasket between the cylinder head and cylinder block of an automible engine, is a static seal or gasket. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 2000 Nos/Day

Land & Building (1100 sq.mt.) Rs. 60 Lacs

Plant & Machinery Rs. 20 Lacs

W.C. for 2 Months Rs. 37 Lacs

Total Capital Investment Rs. 1.26 Cr.

Rate of Return 20%

Break Even Point 64%

****************************************************

FUSED MAGNESIA

The Company proposes to manufacture Fused Mangnesia (Mgo), also called Magnesium oxide and few allied produts namely MagAL, MegChrome, and MagCarbon bricks an extremely hi-tech products, with closely guarded technology throughout the world. this is at present, a 100% import substitution products. MgO finds wide application in Indian Steel Industry as refractory material. It has other important usage in Electrical Glass and Chemical industries and can’t be substituted by any other product. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10 Ton/Day

Land & Building (2000 sq.mt.) Rs. 83 Lacs

Plant & Machinery Rs. 53 Lacs

W.C. for 3 Months Rs. 61 Lacs

Total Capital Investment Rs. 2.08 Cr.

Rate of Return 33%

Break Even Point 56%

**************************************************

Non Asbestos Cement Corrugated Sheet are made from a mixture of cement to which is added a small quantity of bonding material like sodium silicate. During manufacture, it acquire a uniform coating of fine cement particles and give strength and lightness to the finished product. These sheets are built up in specially designed rolling mills. After reaching maturity they are found to possess considerable toughness and flexibility, and do not show any stratification and lamination. In the manufacture of roofing sheets or slates the sheets are subjected to high pressure to remove air bubbles and excessive moisture, cut to size, and cured in a steaming chamber. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 MT/Day

Land & Building (5 Acres) Rs. 3.46 Cr.

Plant & Machinery Rs. 73 Lacs

W.C. for 1 Months Rs. 1.45 Cr.

Total Capital Investment Rs. 5.78 Cr.

Rate of Return 69%

Break Even Point 31%

*************************************************

The term repacking is purchasing the finished product in bulk from the market and pack the same in small packing and sell in the market with own name and trade mark. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Land & Building (1500 sq.mt.) Rs. 72 Lacs

Plant & Machinery Rs. 20 Lacs

W.C. for 1 Months Rs. 2.04 Cr.

Total Capital Investment Rs. 3 Cr.

Break Even Point 7%

***************************************************

It is a deep red fuming liquid, member of the halogen elements as Group VII of the periodic table that is liquid at ordinary temperature and pressure. A rare element bromine is found in, nature dispersed throughout the earth crust only in compounds such as soluble and insoluble bromides. The chief commercial source of bromine is ocean water, from which the element is extracted by means of chemical replacement (oxidation) by more active chlorine. Bromine has traditionally been manufactured as a by product from saline mother liquors (bitterns) left after the crystallization of the main salt products. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5 MT/Day

Land & Building (5000 sq.mt.) Rs. 1.10 Cr.

Plant & Machinery Rs. 68 Lacs

W.C. for 1 Months Rs. 12 Lacs

Total Capital Investment Rs. 2.03 Cr.

Rate of Return 95%

Break Even Point 30%

*****************************************************

Silvered glass is known from very beginning. It is called as mirrors and used for seeing the image of any object. The term silvering, as applied to the formation of a metallic coating on glass to give the properties of mirror, was formerly a missnomer till about 1840, because no proportion of coating solutions contain silver or silver salts. The old amalgamation method which is little used now consisted of spreading a Tin foil on the glass surface, the then amalgamating the Tin with mercury. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 KGS/Day

Land & Building (1000 sq.mt.) Rs. 26 Lacs

Plant & Machinery Rs. 3 Lacs

W.C. for 1 Months Rs. 7 Lacs

Total Capital Investment Rs. 37 Lacs

Rate of Return 72%

Break Even Point 33%

*****************************************************

(PHTHALATE FREE)

Plastisol inks are acclaiming renown now-a-days which find their suitability for T-shirt printing. The principles of ink fromulation enrisage the primal significant consideration in regard to the type of ink to be made and the particular printing process for which it is intended to be used. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 500 KGS/Day

Land & Building (1000 sq.mt.) Rs. 31 Lacs

Plant & Machinery Rs. 15 Lacs

W.C. for 1 Months Rs. 11 Lacs

Total Capital Investment Rs. 60 Lacs

Rate of Return 73%

Break Even Point 37%

******************************************************

Plastic moulding components viz washing M/c. Refrigerator parts, Invertor parts,Motor & Submersible pumps parts are to be manufacture by using Injection Moulding Machine. Electric lights are supplied with electricity from a storage battery. When the storage battery runs down, it can be recharged from an outside source, or from a dynamo, run from the engine. The old style ‘carbon’ filament in the electric globe consumed so much current that it was difficult to obtain a storage battery of a reasonable size and weight which would supply current from any length of time. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Land & Building (300 sq.mt.) Rs. 8 Lacs

Plant & Machinery Rs. 30 Lacs

W.C. for 1 Months Rs. 13 Lacs

Total Capital Investment Rs. 55 Lacs

Rate of Return 62%

Break Even Point 42%

*************************************************

Industrial Refrigeration Syestem is carving a very conspicuos niche iin the prevailing various industrial fields, which call forth their application for refrigeration system. This eventually is a stepping stone to give boost to their enhancement in demand. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5 Nos/Day

Land & Building (500 sq.mt.) Rs. 11 Lacs

Plant & Machinery Rs. 6 Lacs

W.C. for 1 Months Rs. 8 Lacs

Total Capital Investment Rs. 25 Lacs

Rate of Return 31%

Break Even Point 61%

**************************************************

Capacitor core is a important part of Capacitor over which coil is wound which serve the purpose for providing current as per requirements. Its is made of plastic (Poly propylene) which is a insulator which helps in prevention of short circuiting with other inner parts of the capacitor. Thus the functioning of the capacitor core is related to the demand of capacitor as it is an essential components of the Capacitor. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10000 Nos/Day

Land & Building (500 sq.mt.) Rs. 16 Lacs

Plant & Machinery Rs. 6 Lacs

W.C. for 1 Months Rs. 2 Lacs

Total Capital Investment Rs. 26 Lacs

Rate of Return 58%

Break Even Point 45%

*******************************************************

In modern times of unpsurging business network in regard to novel business strategies being implemented, MBA College occupies a conspicuous niche, and its significance cannot be underestimated. The basic aim of MBA College is to enlighten a student on newer and more effective measures to be undertaken tp promote business in the perspective of better returns and generating more revenues. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 300 Students/Annum

Land & Building (2 Acres) Rs. 4.23 Cr.

Plant & Machinery Rs. 51 Lacs

W.C. for 1 Months Rs. 23 Lacs

Total Capital Investment Rs. 5.62 Cr.

Rate of Return 32%

Break Even Point 52%

****************************************************

The vast majority of PVC hompolymer and copolymer resins are polymereized in a suspension system and hence are referred to as suspension or general purpose resins. PVC Resin (Suspension Grade) is used in the calender and extrusion processing of vinyl plastics, suspension resins vary in particle size. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 167 MT/Day

Land & Building (50 Acres) Th. 2.45 Lacs

Plant & Machinery Th. 10.23 Lacs

W.C. for 3 Months Th. 82 Th.

Total Capital Investment Th. 13.90 Lacs

Rate of Return 71%

Break Even Point 33%

***************************************************

Friction materials like brake linings clutch facing, and transformer bands are bonded largely with phenolic resins. Automotive applications are the largest outlet for friction elements, though many other vehicles and machines depend on such composites, including aircraft, trains, drilling rigs etc. Two important recent developments have occured in automotive-brake element; conversion of drum brakes to disc brakes and the development of non asbestos composites both developments require that the binder resins exhibit higher temperature performance without deleteriously affecting the coefficient of friction coefficient stability over a broad temperature range,wear of the composite and improved adhesion to the semimetallic additive which replace asbestos. The phenolic resin generally is employed at 10-20% of the composite mix. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1000 KGS/Day

Land & Building (350 sq.mt.) Rs. 6 Lacs

Plant & Machinery Rs. 7 Lacs

W.C. for 1 Months Rs. 4 Lacs

Total Capital Investment Rs. 20 Lacs

Rate of Return 97%

Break Even Point 31%

****************************************************

These spices are not used one at a time. For preparation of any dish may be Indian or European, may be vegetarian of non-Vegetarian we use more than one spice for its preparation. The combination of all the spices put together for the use of one particular dish is known as MASALA. Spices are the basic ingredients of indan food. Rich or poor, every househld uses spices. There is vast market available for the spices. Quality spices, hyginically processed and properly packed would find ready customers. There is a good scope for export too. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Land & Building (450 sq.mt.) Rs. 27 Lacs

Plant & Machinery Rs. 10 Lacs

W.C. for 1 Months Rs. 5 Lacs

Total Capital Investment Rs. 46 Lacs

Rate of Return 59%

Break Even Point 36%

****************************************************

Cold storage industry is a very important and essential industry. In India, fruits and vegetables are produced in plenty. A large number of fruits and vegetables are exported to other countries and even in India itself fruits and vegetables are transported from one place to another. This transportation business takes some time. So, it is desirable that fruits should be kept at a place where they can remain safe, other wise a lot of its will be wasted. For this purpose, Cold Storage is used. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10000 MT COLD STORAGE

3 MT/DAY POTATO WAFERS

Land & Building (8470 sq.mt.) Rs. 4 Cr.

Plant & Machinery Rs. 2.88 Cr.

W.C. for 3 Months Rs. 1.74 Cr.

Total Capital Investment Rs. 9.51 Cr.

Rate of Return 30%

Break Even Point 48%

****************************************************

The name tamarind comes from the persian, Tamarind, and means Indian date. The specific name, indica refers to the supposed Indian origin of the tree. It is now commonly held the tree is African in origin, but in cultivated in most propical countries. The tamarind tree is evergreen and grows to large sizes. In young trees the trunk is straight and shapely, in older trees the trank may become abnormally and irregular thick, especially if the tree has been roughly treated as is most of them the case, leaves are compound, consisting of many small leaflets and grow so densely on the tree that they cast an unbroken and pleasant shade on the ground. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 500 KGS/Day

Land & Building (500 sq.mt.) Rs. 29 Lacs

Plant & Machinery Rs. 26 Lacs

W.C. for 3 Months Rs. 11 Lacs

Total Capital Investment Rs. 70 Lacs

Rate of Return 14%

Break Even Point 73%

***************************************************

Energy is becoming a scarce and costly input in the world. Oil which accounts for a sizeable portion of our energy consumption, has been making a very heavy tax on our foreign exchange resources. Other than coal, we must also find alternate resources of energy centred around solar, wind, tidal and bio-gas. An effective bio-gas programme leads to efficient use of cow dung for gas recovery and partial supplement to plant nutrient requirement. Bio-gas programme leads to improvement in rural living including rural sanitation. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 120 Cum/Day

Land & Building (800 sq.mt.) Rs. 15 Lacs

Plant & Machinery Rs. 2 Lacs

W.C. for 2 Months Rs. 2 Lacs

Total Capital Investment Rs. 21 Lacs

Rate of Return 18%

Break Even Point 66%

******************************************************

L-Lysine-HCl is an important chemical compound, coming under the category of Amino Acids. It is available in white powder or pale brownish powder and also available in crystalline structure. It is mainly used in preparation of pharmaceutical products. It’s use is also extended for food enrichment, Animal feed enrichment, preparation of tissue culture media etc. It is highly demanded all over India. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1000 KGS/Day

Land & Building (1000 sq.mt.) Rs. 59 Lacs

Plant & Machinery Rs. 1.28 Cr.

W.C. for 3 Months Rs. 1.71 Cr.

Total Capital Investment Rs. 3.84 Cr.

Rate of Return 35%

Break Even Point 50%

***************************************************

India is a developed country and for a developed country where the basic organic chemical industry had to start from the available resources, rectified spirit was found to be a suitable raw material for variety of products. It is a very valuable material in the manufacture of acetone, acetic acid, ammunition, either chloroform, ethylacetate, polyethylene, styrene, polystyrene, synthetic rubber, etc. It is also necessary as a solvent in the manufacture of fine chemicals, medical preparations, toilets etc. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 7000 Litres/Day

Land & Building (2500 sq.mt.) Rs. 1.36 Cr.

Plant & Machinery Rs. 91 Lacs

W.C. for 3 Months Rs. 40 Lacs

Total Capital Investment Rs. 2.76 Cr.

Rate of Return 33%

Break Even Point 53%

*****************************************************

Mini Flour mill serve the purpose of processing wheat to convert it into Atta, Maida, Suji. Wheat grains are the seeds of the wheat plant which is able to grow in kinds of soil and under widely differing Climatic conditions. The principle wheats of commerce belong to the botanical groups Triticum vulgane, Triticum drum and triticum compactum. A grain of wheat is avoid in shape fine hains. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 22.40 MT/Day

Land & Building (1200 sq.mt.) Rs. 77 Lacs

Plant & Machinery Rs. 14 Lacs

W.C. for 3 Months Rs. 2.14 Cr.

Total Capital Investment Rs. 3.07 Cr.

Rate of Return 30%

Break Even Point 41%

****************************************************

MOSQUITO COILS AND MATS

The production of the mosquito coil dates back from the period around 1890. In the early stages they look the shapes of an incense stick burned at household Buddhist altars, but later on they were gradually improved to the present spiral from so that they could keep burning for as long as possible the spiral has a burning time of more than seven hours, having its origin in Japan, the mosquito coil is an insecticide which has long been familiar to the Japanese because of its handiness and economy. The demand for this coil is now on the increase year by year not only in this country but also in overseas countries. A considerable quantity of the coils is being exported from Japan during recent years, which is the evidence of world recognition of the true value of the coils. Now, production has been started in South East Asian and African countries under technical co-operation with Japan. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 3500 Packets/Day

Land & Building (500 sq.mt.) Rs. 6 Lacs

Plant & Machinery Rs. 11 Lacs

W.C. for 1 Months Rs. 5 Lacs

Total Capital Investment Rs. 24 Lacs

Rate of Return 161%

Break Even Point 30%

*****************************************************

PLASTIC MOULDED FURNITURE

One of the most important plastics processing operations, in terms of variety of products made and amount of material handled, is injection molding. This production method now is being used to manufacture items from practically every known plastics. Injection molding is somewhat unusual among production methods in that essentially the entire process in carried out on the injection molding machines were similar in general design to metal die casting machines, but the processing characteristics of plastic have led to change in design & evolution that are still going on. The product injection molded plastic furnitures are the products produced by these injection molding machines with varied shape & size along with different colour & shades according to the choice of customers & even according to the pattern as per the modern society such as office culture, drawing rooms of houses, which give style & likingness of consumers. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 500 Pcs/Day

Land & Building (500 sq.mt.) Rs. 12 Lacs

Plant & Machinery Rs. 14 Lacs

W.C. for 1 Months Rs. 12 Lacs

Total Capital Investment Rs. 38 Lacs

Rate of Return 140%

Break Even Point 21%

*****************************************************

The asbestos sheet was invented in 1900 in Austria and in 1914 it was first manufactured in Japan. Since then improvements have been repeatedly made in the quality, shape and manufacturing process of asbestos sheet. Now the industry has grown up to produce 30 million sheets a year. These sheets are made of asbestos cement. Asbestos is a generic term describing a variety of naturally formed hydrated silicate that, upon mechanical processing, separate into mineral fibers. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 120 Ton/Day

Land & Building (40000 sq.mt.) Rs. 1.56 Cr.

Plant & Machinery Rs. 5 Cr.

W.C. for 3 Months Rs. 3.09 Cr.

Total Capital Investment Rs. 12.38 Cr.

Rate of Return 80%

Break Even Point 24%

****************************************************

Aluminium is the most abundantly occuring metallic element being even more plentiful than iron. However, it never occurs free, but is always found in the combined state, it was first isolated in 1925 by Oersted and was compartively rare till 1986 when the electrolytic process for its preparation was discovered simultaneously by hall in American, and by Heroult in france. Since then it has rapidly attained the position of a major industrial metal. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5000 MT/Annum

Land & Building (5 Acres) Th. 41 Th.

Plant & Machinery Th. 9 Lacs

W.C. for 3 Months Th. 2 Lacs

Total Capital Investment Th. 12 Lacs

Rate of Return 12%

Break Even Point 75%

**************************************************

No one really knows for certain when man took weaving cloths. It is know Adam and Eve knew of their nakedness when they had eaten the fruit of knowledge. They then made approus of fig leaves to cover their nudity. Be that as it may, the first evidence we have of cloth being used is during neolithic age (6000 years ago) when we find that the strands of animal and vegetable fibre were made into thread by twisting by hand, the thread plaited together and then woven into a simple pit-loom into cloth. Fragment of such plaited cloth have been found in Switzerland. In India, perhaps, it happened likewise but we have nothing on record. According to the sacred texts of the Vedas the basic apparel continued to comprise of Antaria (lower garment) and Uttaria (upper garment) both unstitched but in addition men and woman began to a kayaband (sash) to hold up Antaria. A Urinisoe (turban) began to be worn as head gear. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 50 Ton/Day

Land & Building (4 Acres) Rs. 96 Th.

Plant & Machinery Rs. 4 Lacs

W.C. for 3 Months Rs. 2 Lacs

Total Capital Investment Rs. 8 Lacs

Rate of Return 35%

Break Even Point 42%

***************************************************

Car Shampoo is used to clean the car & automobiles in a very shining and glazed manner without affects of the car paint leaving the car surface free from dirt, oil greasy material and other impurities. Modern shampoos are based on sulphated fatty alcohols and sulphonated fatty alcohol ethers. Triethanolamine lauryl sulphte is a brown transparent viscous liquid and is the most widely accepted cleaning agent used in shampoos. Sodium lauryl sulphate is powder highly soluble in water and is a good emulsifier, it may also be obtained as a paste. Mono ethanolamine lauryl suphate is similar to triethanolamine lauryl sulphate and its viscosity can be increased by adding sodium chloride. Turky red oil or sulphated castor oil is a viscous water-miscible liquid having good detergent and emulsifying properties. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 200 KGS/Day

Land & Building (500 sq.mt.) Rs. 8 Lacs

Plant & Machinery Rs. 8 Lacs

W.C. for 1 Months Rs. 4 Lacs

Total Capital Investment Rs. 26 Lacs

Rate of Return 67%

Break Even Point 39%

**************************************************

Even though India is not very vast compared to China, USSR or South American Countries like Brazil, in terms of surface area, the diversity in the climatic conditions north and south, East and West, and the huge mass of population, both urban and rural, in the process of development and getting used to the modern ways of living, makes it one of the fast growing markets of chemicals in the world, India is now in a new path of industrial development with the help of advanced technology. This new development wave can be seen in each and every field. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 50 KGS/Day

Land & Building (1200 sq.mt.) Rs. 20 Lacs

Plant & Machinery Rs. 5 Lacs

W.C. for 3 Months Rs. 9 Lacs

Total Capital Investment Rs. 36 Lacs

Rate of Return 13%

Break Even Point 74%

*****************************************************

Calcium gluconate contains not less than 8.8% and not more than 9.5% calcium corresponding to the formula Ca (C6H11O7)H2O.Calcium gluconate is used as a source of calcium iron for oral intravenous and intramuscular use. This is much superior to calcium chloride in that it tastes better and is much and is much less irritating. Calcium gluconate also finds extensive use in the treatment of milk fever in cows and low calcium tetany. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 0.20 MT/Day

Land & Building (1000 sq.mt.) Rs. 18 Lacs

Plant & Machinery Rs. 9 Lacs

W.C. for 2 Months Rs. 6 Lacs

Total Capital Investment Rs. 37 Lacs

Rate of Return 28%

Break Even Point 59%

*****************************************************

Two processes are currently in practice for tyre retreading. The conventional hot process and the latest technology of procure retreading system or cold process. In cold process of tyre retreading the tread is procured and pretoughened in powerful hydraulic process at high pressure which gives a dense tough retread and maintains a uniform consistency and resilience. Tread rubber is a most popular item in the Automobile tyre manufacturing industries. The demand of this item is increasing with the tyres and automobile tyres. A tyre is an integral component of a vehicle and is the intermediary between the vehicle and the road. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 2 MT/Day

Land & Building (1500 sq.ft.) Rs. 4 Lacs

Plant & Machinery Rs. 22 Lacs

W.C. for 3 Months Rs. 22 Lacs

Total Capital Investment Rs. 49 Lacs

Rate of Return 46%

Break Even Point 44%

*****************************************************

Twentieth Century is the age of advertisement. The finished product which is ready for marketing may be as pure as required or it may be a superior product compared to the product available in the market, but it will not catch the eyes of the customer until and unless it is packed in a well presentable packing. Product quality comes first of all, then comes the economy. If we have a product of low quality but within certain specification as laid down and if this product is well packed and well presented, there is 100% possibility of its selling better compared to a product of very high quality but with a poor packing, and hence which has a less appeal to the eyes. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 120 Nos/Day

Land & Building (450 sq.mt.) Rs. 16 Lacs

Plant & Machinery Rs. 8 Lacs

W.C. for 3 Months Rs. 25 Lacs

Total Capital Investment Rs. 51 Lacs

Rate of Return 32%

Break Even Point 57%

*****************************************************

Potato is widely consumed as food all over the world. Cooked potatoes, in various forms are offered in restaurants and refreshment stalls and variety of processed potato products are available in the market. Surplus and cull potatoes are used as feed for livestock and also as raw material for the manufacture of starch, ethyl alcohol and a few other industrial products. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 2 Ton/Day

Land & Building (1000 sq.mt.) Rs. 35 Lacs

Plant & Machinery Rs. 27 Lacs

W.C. for 1 Months Rs. 30 Lacs

Total Capital Investment Rs. 97 Lacs

Rate of Return 139%

Break Even Point 26%

***************************************************

The term Plastics usually refers to a large and varied group of synthetic materials which are solid in finished form but at some stage in their processing are fluid enough to be shaped by application of heat and pressure. The use of plastics in building has grown rapidly in the last few years. Plastics were first used for decorative and non structural purposes but because of increased knowledge of the long term properties of plastics particularly resistance to creep and environmental effects some plastics are now available that maintain long term structural integrity, such as piping, doors and windows, water tanks that can contain moderate pressures for a long period of time. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 50 Nos/Day

Land & Building (2000 sq.mt.) Rs. 45 Lacs

Plant & Machinery Rs. 1.14 Cr.

W.C. for 3 Months Rs. 1.11 Cr.

Total Capital Investment Rs. 2.81 Cr.

Rate of Return 22%

Break Even Point 56%

****************************************************

The earliest fungicides were inorganic materials like sulphur, lime-sulphur, copper, and mercury compounds. Elemental sulphur has been recognized as fungicidal for at least 170 years. Hence, in 1803, the Royal Gardener Forsyth recommended the use of a sulphur spray against mildew on fruit trees. In the nineteenth century sulphur was increasingly employed against powdery mildew on fruit and later for control of powdery mildew on grapes. It may be applied as dusts or sprays, and the more finely divided the sulphur, the more effective is the formulation against the disease. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1000 KGS/Day

Land & Building (500 sq.mt.) Rs. 9 Lacs

Plant & Machinery Rs. 11 Lacs

W.C. for 3 Months Rs. 6 Lacs

Total Capital Investment Rs. 28 Lacs

Rate of Return 23%

Break Even Point 65%

****************************************************

Ammonia is a colourless alkaline gas, lighter than air and possesses a unique penetrating odour. Today the primary use of ammonia is as the nitrogen source in fertilizers. Until the turn of this century, the nitrogen supply in farm soils was entirely dependent upon natural sources of nitrogen, mainly mineral deposits and animal and vegetable wastes. Most of these were from industries other than agriculture eg. animal manures, seed meals fish scraps, packing house wastes, sewage sludges, leather scraps, dried blood and ammonia sulphate from the coking coal. Today ammonia is primarily produced by direct synthesis of hydrogen and nitrogen. The mfg. technology stems from the Haber Bosch process of synthesizing ammonia, commercialized first in 1913. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 2 MT/Day

Land & Building (2400 sq.mt.) Rs. 23 Lacs

Plant & Machinery Rs. 31 Lacs

W.C. for 3 Months Rs. 9 Lacs

Total Capital Investment Rs. 73 Lacs

Rate of Return 26%

Break Even Point 58%

****************************************************

A variety of formented products prepared, including sauces, which furnish the basic flavouring in chinese and japanese dishes. In India Soyabean has not attained such importance on a food crop till the products like Nugget-Nutrela came to the market. The seeds are consumed locally after splitting as ‘Dal’. They are also purchased and used as ‘Hunja" or ground in to a meal and used in to a meal and used in food preparation, a fermented product is prepared from Soyabean in Manipur. Soyabean passes a characteristic nutty or beany flavour which is not much flavourable in India, flavour and to popularise the use of soyabean in non cereal types cultivated in the plains of India contain a higher percentage of protein and a lowers percentage of oil than those from yellow or chocolate seeds types. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10000 Ltr./Day Milk

10 Tons/Day Bariya

10 Tons/Day Oil

15 Tons/Day Cake

Land & Building (2000 sq.mt.) Rs. 68 Lacs

Plant & Machinery Rs. 32 Lacs

W.C. for 3 Months Rs. 3.65 Cr.

Total Capital Investment Rs. 4.68 Cr.

Rate of Return 153%

Break Even Point 13%

*****************************************************

Poly Vinyl Butyral Resin is a reaction poduct of poly vinyl alcohol and Butyraldehyde. During the 1930 and 1940 much technical efforts were spent in Canada and the United States on developing the process and commercializing the Poly Vinyl Butyral Resin. The main driving force for the commercialization of this polymer is the use as the inner layer for laminated safety glass in automobiles and other transportation Vehicles where it replaced the plasticized cellulose acetate in use at that time. The principal type of Poly Vinyl Butyral available in the United States are Grade B-76 and B-79 which differ only in molecular weight have a high butyral content and a lower hydroxyl content than all of the other grades which also differ only in mol wt. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1 MT/Day

Land & Building (1000 sq.mt.) Rs. 29 Lacs

Plant & Machinery Rs. 20 Lacs

W.C. for 2 Months Rs. 31 Lacs

Total Capital Investment Rs. 85 Lacs

Rate of Return 46%

Break Even Point 40%

***************************************************

Coal is a combustible solid, usually stratified. It is formed by the burial of partially decomposed vegetable in past geological ages. After that, pressure and temperature changed them to coal. Variations in the proportion of various plant components cause the different types of coal such as banded,splint cannel and bog head coal. The content of impurities in coal make different grades of coal. The following are the different kinds of coal depending upon their stage of coalification. Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 Ton/Day

Land & Building (2 Acres) Rs. 45 Lacs

Plant & Machinery Rs. 88 Lacs

W.C. for 3 Months Rs. 75 Lacs

Total Capital Investment Rs. 2.35 Cr.

Rate of Return 73%

Break Even Point 39%

****************************************************

OPTICAL WHITENERS

All types of textile fibres, natural or synthetic, do not appear perfectly white but exhibit a yellow tinge because of the presence of certain coloured impurities which absorb some of the incident light in the blue end of the spectrum. Three methods are available to remove the yellow tinge. The first one is the destruction of the colouring matter by bleaching agents. This method is invariably used to remove most of the colouring impurities from the fibre but it is not possible to eliminate totally the slight yellowish tinge without degradation of the fibre itself. The second method employs the use of blueing agents on the bleached fabric. These agents correct the yellowness of the fabric by absorption of yellowness of the fabric by absorption of yellow light by the applied blue pigment. In this case the yellowish white fabric acquires a greyish white appearance. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1 Ton/Day

Land & Building (5000 sq.mt.) Rs. 38 Lacs

Plant & Machinery Rs. 15 Lacs

W.C. for 2 Months Rs. 32 Lacs

Total Capital Investment Rs. 84 Lacs

Rate of Return 78%

Break Even Point 24%

*****************************************************

Barrel rolling is defined as a relatively slow operation imparting friction by meaqns of a steady relative movement of a mass of parts with or without added media under such conditions that impact within the mass is reduced to a minimum, preferably zero. Abrasive barrel finishing merely indicates the presence of abrasive material such as aluminium oxide within the mass. Abrasive burnishing, another similar term, is actually barrel finishing with abrasive media, the prime purpose of which is the production of "colour" or brightness in combination with smoothness. A true burnishing operaiton, as the name infers, is one in which metal is not removed but instead is flowed and surface-worked with a burnishing tool or with burnishing media of a nonabrasive substance in a barrel. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 200 KGS/Day

Land & Building (150 sq.mt.) RENTED

Plant & Machinery Rs. 4 Lacs

W.C. for 3 Months Rs. 3 Lacs

Total Capital Investment Rs. 8 Lacs

Rate of Return 63%

Break Even Point 43%

*******************************************************

Stearates of metal viz, magnesium, etc. are known as driers and metallic soaps. It has long been established that the metal or catier of the metallic soap is the active principle which accelerates the oxidation and polymerization reactions associated with the drying of oils. As many as twenty four metals are known to have activity, but the soaps of cobalt, manganese, lead, iron, calcium, zinc and zirconium account for the major share of present-day-use. Of these cobalt, manganese, lead and iron soaps are the primary driers. Calcium, zinc, and zirconium soaps alone do not promote drying. They are useful only in conjunction with one or more of the primary driers, and thus are termed auxilliary driers. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1000 KGS/Day

Land & Building (800 sq.mt.) Rs. 17 Lacs

Plant & Machinery Rs. 6 Lacs

W.C. for 2 Months Rs. 25 Lacs

Total Capital Investment Rs. 49 Lacs

Rate of Return 52%

Break Even Point 39%

****************************************************

Starch based adhesives are the most important vegetable adhesives. The most simple of these may be made by boiling flour with water, white modern starch adhesives are based on starch and its degradation production. The resulting adhesive is modified by incorporting borax, resins, alkali, inorganic salts, plasticizers, etc. to obtain certain desirable properties. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1 Ton/Day

Land & Building (500 sq.mt.) Rs. 13 Lacs

Plant & Machinery Rs. 4 Lacs

W.C. for 1 Months Rs. 2 Lacs

Total Capital Investment Rs. 21 Lacs

Rate of Return 60%

Break Even Point 39%

****************************************************

Petroleum waxes are broadly defined as the waxes naturally present in the various fractions of crude petroleum. The presence of wax in lubricating oils is determental and it must be removed from the oils. However, after separation from lubricating oils, wax constitutes a valuable and interesting product with special characteristics for a number of important uses. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 67 MT/Day

Land & Building (8000 sq.mt.) Rs. 2.38 Cr.

Plant & Machinery Rs. 2.16 Cr.

W.C. for 3 Months Rs. 8.45 Cr.

Total Capital Investment Rs. 13.33 Cr.

Rate of Return 21%

Break Even Point 55%

**************************************************

FUEL FILTERS

Filtration is a removing unwanted particles by "Screening" Particles in a fluid flowing past a porous sereen either lodge against the screen across the pores because they are larger than the pores, or lodge against the sereen material and are held there by the force of the street which means that particles smaller than the pore size can be trapped particles are also though to be held in place. Once trapped ,by a form of an electrostatic nature,giving them an affinity for the material of the screen and holding them once the flow has stopped. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1000 Ton/Day

Land & Building (2000 sq.mt.) Rs. 42 Lacs

Plant & Machinery Rs. 67 Lacs

W.C. for 3 Months Rs. 88 Lacs

Total Capital Investment Rs. 2.25 Cr.

Rate of Return 15%

Break Even Point 76%

****************************************************

The only commercial ore, chromite, has the ideal composition FeO.Cr2O3, ie 68% Cr2O3 32% Feo or ca 46 chromium. Actually the Cr/Fe ratio varies considerably and the ores are better represented as (Fe, Mg)O (Cr, Fe, Al)2O3. Table 1 gives the calassification of chromite ores. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10 Tons/Day

Land & Building (6000 sq.mt.) Rs. 91 Lacs

Plant & Machinery Rs. 1 Cr.

W.C. for 1 Months Rs. 88 Lacs

Total Capital Investment Rs. 2.98 Cr.

Rate of Return 45%

Break Even Point 54%

****************************************************

Leather board is also, & more generally made by a kind of paper making process in which fibrous material either cellulose (such as waste paper, rag, wood pulp & rope etc.) or scrap leather, is disintegrated, suspended in water & then strained & felted together, Binding agents may be added in order to help the fibre to adhere, althhough this is less necessary when of a high % of cellulose fibre is a used, since after the 8 beating process these fibres from quite stray bords between themselves on dry out from a watery medium. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 2 Tons/Day

Land & Building (1000 sq.mt.) Rs. 24 Lacs

Plant & Machinery Rs. 51 Lacs

W.C. for 3 Months Rs. 19 Lacs

Total Capital Investment Rs. 1.03 Cr.

Rate of Return 75%

Break Even Point 36%

********************************************************

However the advent of th Mini-Cement Plant with vertical shaft kiln, which was introduced in India by an enthusiastic protagonist from Australia, has provided a diversion. In some quarters the Mini Cement plant has a keen following, since it opens up possibilites of exploiting small deposits of limestone in difficult tarrain and thereby contributes to the "Socialist pattern" on the other hand. There is still some doubt as to the quality of clinker produced in these plants. The six units so far setup have yet to establish their commercial viability. Nevertheless the Cement Research Institute of India which possesses the known-how for manufacturing these plants, is hopeful of setting up some 200 such plants around the country. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 MT/Day

Land & Building (20000 sq.mt.) Rs. 1.19 Cr.

Plant & Machinery Rs. 3.76 Cr.

W.C. for 1 Months Rs. 65 Lacs

Total Capital Investment Rs. 6.53 Cr.

Rate of Return 11%

Break Even Point 79%

***************************************************

India is the home of mangoes. A large number of varieties are found in almost all parts of the country. According to statistics collected by the Fruit Development Adviser, Government of India, out of the total fruit acreages of 12,79,000 hamangoes alone covered 8,19,000 ha in 1948-49 i.e., early 70 per cent of total area under fruits. Uttar Pradesh, Tamil Nadu, Karnataka, Bihar and West Bengal lead in mango growing. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 2000 KGS/Day

Land & Building (500 sq.mt.) EXISTING

Plant & Machinery Rs. 5 Lacs

W.C. for 1 Months Rs. 8 Lacs

Total Capital Investment Rs. 14 Lacs

Rate of Return 170%

Break Even Point 33%

*****************************************************

Calcite is the most abundant crystalline form of calcium carbonate (CaCO3) Calcite limestone refers to a high-calcium limestone. As for hardness of calcite is concerned, pure calcite has a hardness of 3 Mohs, whereas naturally occuring limestones lie in the range of 2-4 Mohs. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 50 MT/Day

Land & Building (4000 sq.mt.) Rs. 64 Lacs

Plant & Machinery Rs. 1.29 Cr.

W.C. for 1 Months Rs. 24 Lacs

Total Capital Investment Rs. 2.31 Cr.

Rate of Return 106%

Break Even Point 30%

**************************************************

FLOAT GLASS

The term float glass pertains to all glasses produced in a flat form, regardless of the method of manufacture unlike hollowware, it was not until the middle ages that glass glassblowerrs were finally successful in taken flat sheets of glass for windows and further processing. Mechanical production process were developed which later, effectively after 1920. Today manual production of flat glasses is the exception rather than the rule. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 Ton/Day

Land & Building (10 Acres) Rs. 4.06 Cr.

Plant & Machinery Rs. 31.50 Cr.

W.C. for 3 Months Rs. 6.59 Cr.

Total Capital Investment Rs. 46.55 Cr.

Rate of Return 30%

Break Even Point 53%

**************************************************

Potable spring waters containing, sulphur iron, magnesium and other mineral salts occuring in certain regions are claimed to be beneficial to human matabolism. They occur in specific and widely scattered locations best known of which are white sulphur springs (Virginia) Hot springs (Arkansas), saragoge springs (New York) Vichy (France Baden (Germany) and (U.S.S.R.) The therapitic value of such waters is questionable carbonate mineral waters also contain lithium salts. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5000 Lits/Day

Land & Building (450 sq.mt.) Rs. 9 Lacs

Plant & Machinery Rs. 9 Lacs

W.C. for 1 Months Rs. 3 Lacs

Total Capital Investment Rs. 24 Lacs

Rate of Return 66%

Break Even Point 32%

***************************************************

Flowers are symbol of beauty, love, affection, romance tranquillity etc. Besides their aesthetic value, they are important for their economic uses, such as for cut-blooms and for extracting perfumes and other products. In our country, flowers are sanctified and are commonly used in worshipping the deities in our homes and temples. We are intimately associated with them, and on all festive occasions like marriages religious ceremonies and social functions, the use of flowers and garlands has become almost essential. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 11200 Nos/Day

Plant & Machinery Rs. 45 Lacs

W.C. for 3 Months Rs. 16 Lacs

Total Capital Investment Rs. 71 Lacs

Rate of Return 124%

Break Even Point 30%

***************************************************

The 20th century has seen the emergence of aluminium as a key industrial and strategic material, second to only steel in terms of importance and tonnages of production. A point to notice is the upsurge in production synchronising with the two world wars pointing to the need for aluminium as strategic material. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 20 MT/Day

Land & Building (7 Acres) Rs. 1.97 Cr.

Plant & Machinery Rs. 4.14 Cr.

W.C. for 1 Months Rs. 5.82 Cr.

Total Capital Investment Rs. 12.74 Cr.

Rate of Return 58%

Break Even Point 77%

***************************************************

Bed sheets, Bed covers, furnishings are the items that find great utilization in domestic furnishings as well as in hotels etc. This comprises sheeting, bed Stiching, and bed sheets (handloom, cotton, khadi) other kinds of fabrics etc. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 350 Nos/Day

Land & Building (450 sq.mt.) Rs. 10 Lacs

Plant & Machinery Rs. 1 Lac

W.C. for 3 Months Rs. 29 Lacs

Total Capital Investment Rs. 42 Lacs

Rate of Return 82%

Break Even Point 27%

***************************************************

The history of the soap making industry is unknown and one can not attribute specially the origin of its development. Initially when the so called ‘man made’ cleansing and washing agents were unknown or their developments were not fully matured, the naturally occurring ‘chile salt peter’ i.e. nitrates of sodium and potassium were used as the washing or cleaning agents. Later on with the upsurge of some scientific knowledge, the soap industry came into being which employed the naturally occurring animal fatty oil but due to the limited resources of it, it had to be abandoned and shift to the use of vegetable oils were undertaken. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1 MT/Day

Land & Building (500 sq.mt.) Rs. 13 Lacs

Plant & Machinery Rs. 3 Lacs

W.C. for 1 Months Rs. 6 Lacs

Total Capital Investment Rs. 23 Lacs

Rate of Return 55%

Break Even Point 62%

**************************************************

Rice bran is the most important source of edible oil among the unconventional sources. Rice bran is the brown coating around the white starchy rice kernel which is obtained by dehusking paddy and polishing the rice. Despite the impressive growth of rice bran technology in the country, only a third of the available potential has been exploited. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5 MT/Day

Land & Building (1000 sq.mt.) Rs. 23 Lacs

Plant & Machinery Rs. 29 Lacs

W.C. for 3 Months Rs. 47 Lacs

Total Capital Investment Rs. 1.07 Cr.

Rate of Return 86%

Break Even Point 36%

*******************************************************

Mushroom are large reproductive structures of edible fungi belonging to either Ascomycotina or Basidiomycotina, the vegetative parts of the mushrooms mainly consist of thread-like long,thin mycelia which under suitable conditions form fruit bodies or sporocarps. Mushrooms are usually grown as a fall, winter and spring crop in special structures where the required temperatures can be maintained and where other necessary conditions can be provided. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 50 KGS/Day

Land & Building EXISTING

Plant & Machinery Rs. 1 Lacs

W.C. for 2 Months Rs. 2 Lacs

Total Capital Investment Rs. 3 Lacs

Rate of Return 28%

Break Even Point 73%

******************************************************

Chitin is a chemical compound belong to glucosamine polysaccharide group categories. It contains about 7% nitrogen, and is structurally similar to cellulose. It is the principal constituent of the shells of prawn fish, shrimps, crabs, lobsters, beetles and other sea fishes. It is also found in some fungi, algal, and yeasts. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 51 MT/Annum Chitosan

300 MT/Annum Calcium Chloride

Land & Building (750 sq.mt.) Rs. 17 Lacs

Plant & Machinery Rs. 18 Lacs

W.C. for 2 Months Rs. 16 Lacs

Total Capital Investment Rs. 55 Lacs

Rate of Return 95%

Break Even Point 35%

******************************************************

In India the animal feed industry is of recent origin, the first animal food plant having been established in 1960. There are today as many as 14 plant in the origanised sector, besides many small fed compoundes which operate in large cities. The installed capacity for all types of feeds that can be produced in the units under organised sector in India is estimated in the neighbourhood of 630000 metric tonnes a year. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Land & Building Rs. 10 Lacs

Plant & Machinery Rs. 31 Lacs

W.C. for 3 Months Rs. 66 Lacs

Total Capital Investment Rs. 1.07 Cr.

Rate of Return 15%

Break Even Point 71%

*************************************************

Holiday resorts business is very flourishing business these days not in India only but it has brilliant prospects in foreign countries like America, Canada, Singapore, Nepal etc. Now-a-days, in India, this business is very fruitful as people want full comfort and entertainment during their vacations. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Land & Building (60000 sq.ft.) Rs. 1.66 Cr.

Plant & Machinery Rs. 57 Lacs

W.C. for 1 Months Rs. 15 Lacs

Total Capital Investment Rs. 2.75 Cr.

Rate of Return 133%

Break Even Point 24%

***************************************************

The plant will have facility to produce, maida, sooji, atta and bran. These products will be sold as per the guidance issued for Food and Civil Supplies Department of the concerned state. The same plant can be used to process other cereals such as rice gram, dal etc However, attempt is made have to examine feasibility and profitability of processing wheat to produce maida, Suji, atta and bran. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 TPD/Day

Land & Building (2.5 Acres) Rs. 1.73 Cr.

Plant & Machinery Rs. 2 Cr.

W.C. for 2 Months Rs. 5.86 Cr.

Total Capital Investment Rs. 9.81 Cr.

Rate of Return 30%

Break Even Point 44%

***************************************************

BEER INDUSTRY

Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different Countries take beer in varying much like a soft drink in European Countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every Country. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 16666 Litres/Day

Land & Building (7.6 Acres) Rs. 4.66 Cr.

Plant & Machinery Rs. 20 Cr.

W.C. for 3 Months Rs. 6.04 Cr.

Total Capital Investment Rs. 40.33 Cr.

Rate of Return 21%

Break Even Point 60%

***************************************************

Vehicles require servicing regularly in fix period of times for its longer life. The workshops and service centres fulfill the need for keeping the vehicles fit for trouble-free drive, service stations, thus, not only repair the damages already taken place, but also offer the necessary maintenance to make the vehicle more efficient in its operation. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 12 Vehicles/Day

Land & Building (4000 sq.mt.) Rs. 2.96 Cr.

Plant & Machinery Rs. 42 Lacs

W.C. for 1 Months Rs. 49 Lacs

Total Capital Investment Rs. 4.33 Cr.

Rate of Return 64%

Break Even Point 39%

****************************************************

Herbal hair oil like (Ayurvedic) like Banphool oil is gaining an immense prominence in modern times. The herbal/ayurvedic and medicated hair oils are used as medicine hair tonic. The herbal oil like banphool oil is exhibiting its versality owing to its embalming effect in alleviating headache and cause soothing effect. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 14700 Bottles/Day

Land & Building (3000 sq.mt.) Rs. 28 Lacs

Plant & Machinery Rs. 9 Lacs

W.C. for 3 Months Rs. 1.65 Cr.

Total Capital Investment Rs. 2.04 Cr.

Rate of Return 52%

Break Even Point 25%

**************************************************

In the field of drugs and pharmaceuticals, foreign collaboration has been approved in respect of a number of drug items. The areas where India requires technology upgradation and infusion of new technology are Betalactum antibiotics, Cephalosporins, Rifampicin etc. India is also interested in upgrading technologies for antibiotics such as Penecilline and other items like dapsone. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Land & Building (1000 sq.mt.) Rs. 83 Lacs

Plant & Machinery Rs. 29 Lacs

W.C. for 1 Months Rs. 14 Lacs

Total Capital Investment Rs. 1.27 Cr.

Rate of Return 65%

Break Even Point 36%

****************************************************

Tincture from Rectified Spirit viz Tincture of Iodine (weak iodine solution IP 66) and compound Benzoin Tincture owing to their versatile use in medical treatment field their demand is increasing at a considerable pace. Tincture of Iodine normally available has alcohol content of 45-48% V/V, where as compound Benzoin Tincture has alcohol centent of 70-77% V/V. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10000 Bottles/Day

Land & Building (500 sq.mt.) Rs. 16 Lacs

Plant & Machinery Rs. 5 Lacs

W.C. for 1 Months Rs. 58 Lacs

Total Capital Investment Rs. 79 Lacs

Rate of Return 54%

Break Even Point 28%

***************************************************

Anti-foaming agents may be categorized as solubilized surfactants, as dispersions of hard particlces and as dispersions of soft particles. In all cases a liquid non-aqueous vehicle is present even where the anti-foaming agent is represented as a solid formation. Water may also be present particularly in emulsified silicone formulations. Antifoaming agent are used to reduce foaming owing to proteins gases or nitrogenous materials which may cause interference with processing. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 3 MT/Day

Land & Building (2000 sq.mt.) Rs. 54 Lacs

Plant & Machinery Rs. 41 Lacs

W.C. for 2 Months Rs. 1.83 Cr.

Total Capital Investment Rs. 2.86 Cr.

Rate of Return 27%

Break Even Point 44%

******************************************************

Hair colorants provides a range of commercial products, capable of colouring the hair in various shades and tents ranging from very light blarde to black, passing through a range of tones: golden, ash, reddish, mahogany, violets, etc. The number of shades constituting such a range can exceed sixty. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 20 KGS/Day

Land & Building (300 sq.mt.) Rs. 8 Lacs

Plant & Machinery Rs. 3 Lacs

W.C. for 1 Months Rs. 2 Lacs

Total Capital Investment Rs. 14 Lacs

Rate of Return 46%

Break Even Point 53%

******************************************************

FERROUS SULPHATE

Ferrous Sulphate ‘Copperas’ Green Copperas, Green Vitriol; FeSO4. 7H2O is obtained as pale green crystals soluble in water. It is produced as a by product from waste pickling liquors of galvanizing and tin plates plants or by dissolving scrap iron in warm dilute sulphuric acid. In the bye product process the liquor is treated with scrap iron to reduce the free acid content, neutralized with alkali, filtered and concentrated in evaporators. Alternately, scrap iron and sulphuric acid are added at 1800F, to the liquor to raise the concentration to 430Be. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5 Ton/Day

Land & Building (1200 sq.mt.) Rs. 34 Lacs

Plant & Machinery Rs. 16 Lacs

W.C. for 3 Months Rs. 15 Lacs

Total Capital Investment Rs. 67 Lacs

Rate of Return 25%

Break Even Point 55%

****************************************************

Gelatin capsule was first invented in 1834 by Mothes, a French pharmacy student in collaboration with a French pharmacist Dublanc. They used one piece olive shaped structures which had to be sealed after filling with a drop of concentrated gelatin solution and were counterparts of the modern day soft gelatin capsules. The inventors used the capsules to mask the tastes of obnoxious materials. Mothes first sold empty shells but later supplied only filled ones. As such other inventors tried to appear on the scene to overcome the patent of Mothes. Lehuby in 1846 invented a two piece structure which was identical with the present day hard gelatin capsules. He called them ‘mes enveloppes medicamenteuse’ or medicinal envelopes. the first British patent was granted to Murdoch in 1948 who was Lehuby’s agent. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 400000000 Nos/Annum

Land & Building (1.50 Acres) Rs. 1.19 Cr.

Plant & Machinery Rs. 2.45 Cr.

W.C. for 1 Months Rs. 9 Lacs

Total Capital Investment Rs. 4 Cr.

Rate of Return 28%

Break Even Point 55%

*******************************************************

Rubber belting are mainly used for two purposes namely, conveying and transmission. Conveyor belts are used for conveying various items such as coal, ash, ore, grain, sand, packed goods and other industrial inputs and outputs. They are used in elevators also employed for lifting the passengers at railwayy stations and airport etc. Conveyor beltings are prodeuced in long lengths, are wide and sun at slow speeds over large rollers. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1 MT/Day

Land & Building (1000 sq.mt.) Rs. 33 Lacs

Plant & Machinery Rs. 19 Lacs

W.C. for 3 Months Rs. 85 Lacs

Total Capital Investment Rs. 1.44 Cr.

Rate of Return 38%

Break Even Point 50%

****************************************************

A transformer is a device for tranferring energy in a system from one circuit to another. It consists of two independent electric circuits linked with a common magnetic circuit. This energy at low voltage may be transformed to energy at high voltage, or vice versa. In the like manner, current of a given value in one circuit may be transformed into current of another value in a different circuit. the winding of the transformer connected to the supply circuit is termed as primary winding and these windings of the transformer that are connected to the receiver circuits are called secondary windings. Transformers having more than one primary or secondary winding etc. transformers. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 171 Nos/Day

Land & Building (2000 sq.mt.) Rs. 55 Lacs

Plant & Machinery Rs. 19 Lacs

W.C. for 1 Months Rs. 13 Lacs

Total Capital Investment Rs. 96 Lacs

Rate of Return 22%

Break Even Point 67%

****************************************************

The cement sheets madewith coir fibre and other segments are used for the construction purpose. During this new age of science and technology new process are coming up for the manufacture of different kinds, of materials of construction. Different varieties of pozzulans and cements are in the market. These days rice husk is being used in the manufacture of cement. This material was a nuiscance for rice mills 5-10 years back as there was no way out to dispose it off and large amounts of its accumulated and created problems. Cement is used to manufacture quite a few different kinds of ventillators called "jaalis". Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1000 Sheets/Day

Land & Building (5000 sq.mt.) Rs. 1.35 Cr.

Plant & Machinery Rs. 28 Lacs

W.C. for 2 Months Rs. 30 Lacs

Total Capital Investment Rs. 2 Cr.

Rate of Return 25%

Break Even Point 55%

****************************************************

A genus of rhizomatous herbs distributed in the tropics of the old world, chiefly in India, East Asia and Malaysia. Fourteen, species are reported to occur in India Z-officinale, which is the main source of ginger, is cultivated on a large scale in India. Bangladesh, Taiwan, Jamaica, Nigeria and Sieria, Leone, from which it is exported to other countries the world and ginger is cultivated also for internal consumption in Sri Lanka (Ceylon) and several East Asiatic countries and the crop has been introduced into Queens hand in Australia mainly for pickling. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5 MT/Day

Land & Building (1500 sq.mt.) Rs. 45 Lacs

Plant & Machinery Rs. 27 Lacs

W.C. for 3 Months Rs. 1.24 Cr.

Total Capital Investment Rs. 2.06 Cr.

Rate of Return 35%

Break Even Point 46%

**************************************************

HDPE/PP WOVEN SACKS (BAGS)

HDPE/PP oriented sacks are becoming popular through out the world. This is because they are chemically inert & are water repellent & lighter in weight. They are free & possess sufficient strength & can easily be handled. They are competitive in price with other type of bags also. Air permissible sacks made of polythene strips are used for packing potatoes, coconut etc. The only problem is that the Conventional using of hooks to lift cannot be used with HDPE/PP bags. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 25000 Nos/Day

Land & Building (5000 sq.mt.) Rs. 2.83 Cr.

Plant & Machinery Rs. 2.40 Cr.

W.C. for 3 Months Rs. 2.27 Cr.

Total Capital Investment Rs. 7.95 Cr.

Rate of Return 24%

Break Even Point 58%

******************************************************

Potable spring waters containing, sulphur iron, magnesium and other mineral salts occuring in certain regions are claimed to be beneficial to human matabolism. They occur in specific and widely scattered locations best known of which are white sulphur springs (Virginia) Hot springs (Arkansas), saragoge springs (New York) Vichy (France Baden (Germany) and (U.S.S.R.) The therapitic value of such waters is questionable carbonate mineral waters also contain lithium salts. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Installed Cap: 64000 Ltrs/Day

Production Cap: 6400 Ltrs/Day

Land & Building OWNED

Plant & Machinery Rs. 49 Lacs

W.C. for 1 Months Rs. 21 Lacs

Total Capital Investment Rs. 88 Lacs

Rate of Return 181%

Break Even Point 21%

****************************************************

It is cold water fish and is mainly of spot value. It is cultured in places of high altitude like Kashmir, Himachal Pradesh, Otacmund, etc. Its body is stream lined and is covered with scales, however, the head is naked. An adipose fin is present in addition to rayed dorsal fin. The barbels are present. Trouts feed chiefly on insects, mollusces, fish and tadpoles, however, they are cannibalistic at times. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 100 Ton/Annum Trout Fish

150 Ton/Annum Trout Fish Feed

Land & Building (3 Bigha) Rs. 1.09 Cr.

Plant & Machinery Rs. 54 Lacs

W.C. for 1 Months Rs. 30 Lacs

Total Capital Investment Rs. 2 Cr.

Rate of Return 148%

Break Even Point 19%

****************************************************

In India, Dehydration of fruits and vegetable has a bright prospects over other foods because India has diverse geographical and climatic conditions and produces a wide range of fruits and vegetables throughout the year. Here almost all type of fruits and vegetables are grown all over the country. These fruits and vegetables are valuable foods. They are a rich source of calcium, phosphorus, iron and vitamins. Dehydrated fruits & vegetables include a no. of articles mainly, fruit juices, dehydrated fruits and vegetables, squashes, cordials, Beverages, jam, jellies, mermalades, chutney, sauces, pickles, vinegar, pectin etc. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 500 KGS/Day

Land & Building (5000 sq.mt.) Rs. 1.81 Cr.

Plant & Machinery Rs. 1.16 Cr.

W.C. for 1 Months Rs. 7 Lacs

Total Capital Investment Rs. 3.24 Cr.

Rate of Return 20%

Break Even Point 58%

****************************************************

India is the home of mangoes. A large number of varieties are found in almost all parts of the country. According to statistics collected by the Fruit Development Adviser, Government of India, out of the total fruit acreage of 12,79,000 ha mangoes alone covered 8,19,000 ha in 1948-49 i.e. early 70 per cent of total area under fruits. Uttar Pradesh, Tamil Nadu, Karnataka, Bihar and West Bengal lead in mango growing. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1167 Doz/Day

Land & Building (1300 sq.mt.) Rs. 55 Lacs

Plant & Machinery Rs. 18 Lacs

W.C. for 1 Months Rs. 4 Lacs

Total Capital Investment Rs. 82 Lacs

Rate of Return 195%

Break Even Point 18%

*****************************************************

Fast food centre business is growing very fast in all cities especially in Metro centres. Ice cream business to expand in sync with the development of malls in the country. The company’s relatively new parlour brand under Kwality Walls Swirls is expected to increase its franchise from the existing 30-odd parlours. Mr Sailesh Venkatesan, Category Head, Ice Creams, HLL, told Business Line, "We expect to grow our parlour business and are looking closely at this opportunity through the malls. The faster the number of malls come up, the more number of parlours would be set up.’’ Having set up `Swirls’ two years ago, HLL expects to increase its presence in the premium segment comprising freshly made ice creams. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Land & Building (300 sq.mt.) Rs. 18 Lacs

Plant & Machinery Rs. 10 Lacs

W.C. for 2 Months Rs. 16 Lacs

Total Capital Investment Rs. 54 Lacs

Rate of Return 34%

Break Even Point 55%

****************************************************

The definition of varnish, as given by one of the technical societies is "liquid coating material containing no pigment which flows out to a smooth coat when applied and dries to a smooth, glossy, relatively hard, permanent solid when exposed in a thin film to air". There can be no doubt that varnishes are a heterogeneous system, consisting of resin and thinners, or resins, oils, thinners, and driers. Some institution consider, varnish a solution, others classify it as a colloid. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 500 Litrs/Day

Land & Building (500 sq.mt.) Rs. 11 Lacs

Plant & Machinery Rs. 8 Lacs

W.C. for 1 Months Rs. 6 Lacs

Total Capital Investment Rs. 28 Lacs

Rate of Return 60%

Break Even Point 41%

***************************************************

Poultry industry has emerged as an important supplementary occupation of the farming community in the country. The production is carried out by a highly specialized, efficient polutry industry that has been a leader in trends of scale and industrialization that have taken place over the part 10-15 years. The broiler industry is highly integrated industry in which most of the steps in the production process are controlled by a ringle firm. A Hatchery, breeder flocks, feed mill, processing plant, and a number of contract growers served by technical service staff make up a typical integrated broiler company. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 2 Ton/Day

Land & Building (2000 sq.mt.) Rs. 39 Lacs

Plant & Machinery Rs. 38 Lacs

W.C. for 1 Months Rs. 32 Lacs

Total Capital Investment Rs. 1.38 Cr.

Rate of Return 77%

Break Even Point 29%

**************************************************

Poultry farms are increasing steadily. Many government agencies are encouraging poultry farming and even short term training courses are organised regularly. Such farms have generated considerable employment opportunities in semi urban and rural areas. Marketing of poultry birds is expensive and death of birds during transit is the main bottleneck. This compels most of the poultry farms to concentrate on nearby markets even if it means less prices. Instead, if these birds are processed after dressing and packed in tins then transportation is easier, shelf life of the product goes up and the product is more hygienic. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5000 Bird/Hr/Day

Land & Building (5000 sq.mt.) Th. 24 Th.

Plant & Machinery Th. 38 Th.

W.C. for 1 Months Th. 2.13 Lacs

Total Capital Investment Th. 2.81 Lacs

Rate of Return 109%

Break Even Point 17%

**************************************************

It was claimed in 1968 that there were 2823 types of frozen foods, including 639 types of frozen vegetables, 446 frozen deserts, and 448 types of frozen sea-food . It is further stated that 58% of the volume of frozen foods is fruit juices and vegetables. It is also said that forgen soups account for 11.4% and baked goods for 10.1%. Before freezing, it is necessary to blanch the product to destroyenzymes, which would result in off-flavors and consequent quality deterioration. Rapid freezing is important, since just as with ice cream, it results in a smoother product having smaller ice crystals and a more natural body and texture. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 16 MT/Day

Land & Building (2 Acres) Rs. 1.53 Cr.

Plant & Machinery Rs. 1.70 Cr.

W.C. for 1 Months Rs. 86 Lacs

Total Capital Investment Rs. 4.52 Cr.

Rate of Return 44%

Break Even Point 45%

****************************************************

Canning or hermetic sealing is one of the most important commercial processes developed in vegetables. The canning or hermetic sealing in metal or glass containers after heat sterilization food preservation in assured both by the destruction of spoilage organisms present in materials and by preservation of infection from outside sources. Almost all the methods of preservation, excepting cold storage and dehydration, are covered by the term canning, and the material handled cover a wide range and include fruits and vegetables, fish and meat products, and milk and dairy products, but not powder and dry solids such as biscuit, cocoa and coffee, which are sealed in tinplate container for protection against insects, dust, and moisture. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 5000 Cans/Day

Land & Building (2000 sq.mt.) Rs. 72 Lacs

Plant & Machinery Rs. 32 Lacs

W.C. for 2 Months Rs. 57 Lacs

Total Capital Investment Rs. 1.75 Cr.

Rate of Return 67%

Break Even Point 39%

****************************************************

Vegetable oils are obtained from oil seeds, tree crop or seed from the seed of annually grower crops. Thy include most of the fatty acids esters of glycerol, commonly called trglycerides which provide the world wit its supplies of edible oils and fats. The fats and oils are respectively solid and liquid at ambient temperature. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10 Ton/Day

Land & Building (2000 sq.mt.) Rs. 1 Cr.

Plant & Machinery Rs. 61 Lacs

W.C. for 3 Months Rs. 4.26 Cr.

Total Capital Investment Rs. 6 Cr.

Rate of Return 87%

Break Even Point 26%

******************************************************

Decolorization of Refined Rice bran oils is the process involves the removal of pigments which are either dissolved in the oil or present in the form of colloidally dispersed particles by the process of decolorization; Refined Rice bran oil (Edible grade) is converted to acceptable crystal clear Refined Rice bran oil. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 15 Ton/Day

Land & Building (1500 sq.mt.) Rs. 70 Lacs

Plant & Machinery Rs. 15 Lacs

W.C. for 1 Months Rs. 2.36 Cr.

Total Capital Investment Rs. 3.23 Cr.

Rate of Return 85%

Break Even Point 20%

****************************************************

A dairy is a place for handling milk and milk products. Technology refers to the application of scientific knowledge for practical purposes. Dairy technology has been defined as that branch of dairy science which deals with the processing of milk and the manufacture of milk products on an industrial scale. In developed dairying countries such as the U.S.A., the year 1850 is seen as the dwiding line between form and factory scale production. Various factors contributed to this change in these countries, viz concentration of population in cities where jobs were plentiful, rapid industrialisation, improvement of transportation facilities, development of machines etc, whereas the rural areas were identified for milk production, the urban centres were selected for the location of milk processing plants and product manufacturing factories. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 10000 Ltr./Day

Land & Building (1.5 Acres) Rs. 1.05 Cr.

Plant & Machinery Rs. 18 Lacs

W.C. for 1 Months Rs. 29 Lacs

Total Capital Investment Rs. 1.62 Cr.

Rate of Return 27%

Break Even Point 54%

****************************************************

Soyabeans are very much popular as food crop in most of the countries all over the world where a large number of food products are prepared form soyabean seeds. As edible oil milk and milk products giving sources crop the soyabeans are getting wide acceptance. In India too since last few decades. Souyabean seeds have a high nutritional composition ;and can be converted in to various states, tastes, colours, flavours and other quality substances. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 3.33 Ton/Day

Land & Building (2000 sq.mt.) Rs. 1.05 Cr.

Plant & Machinery Rs. 24 Lacs

W.C. for 1 Months Rs. 16 Lacs

Total Capital Investment Rs. 1.48 Cr.

Rate of Return 19%

Break Even Point 61%

*****************************************************

Tea is one of the most popular beverages and is consumed by nearly half of the world population. India was the first country to cultivate the tea as far back as 2737 B.C. Tea is made from the young leaves & unopened buds of the plant ‘Camelia Binerisies’. This plant is grown in tropical and subtropical regions. It is considered to be native of Assam and upper Indo-China. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Plant Capacity 1 Tons/Day

Land & Building (250 sq.mt.) Rs. 8 Lacs

Plant & Machinery Rs. 15 Lacs

W.C. for 3 Months Rs. 68 Lacs

Total Capital Investment Rs. 93 Lacs

Rate of Return 30%

Break Even Point 49%

******************************************************

Calcium stearate can be used as a stabiliser in its own right, or as a lubricating co-stabiliser (with synergistic effetcs in some cases) in conjunction with other stabilisers, such as organotin and antimony compounds (e.g., in rigid pipe compositions of the American kind). Whilst it is not a highly powerful stabiliser, calcium stearate has a reasonable heat-stabilising action, although with relatively little light-stabilising effect. It is useful with emulsion-type PVC polymers and finds use in certain paste formulations (especially in UK). Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Cost Estimation

Plant Capacity 1000 Kgs/Day

Land & Building (500 sq.mt.) Rs. 30 Lacs

Plant & Machinery Rs. 12 Lacs

W.C. for 1 Months Rs. 11 Lacs

Total Capital Investment Rs. 59 Lacs

Rate of Return 55%

Break Even Point 43%

MULTI WALL PAPER SACKS FOR TEA INDUSTRY (MADE LKUP OF 3 LAYERS OF 80 G.S.M. KRAFT PAPER 9 MICRON ALUMINIUM FOIL TUBE TYPE

Multiwalled Paper sacks for Tea Industry are made up of 3 layer 80 GSM Kraft Paper and 9 Micron Aluminium Foil Tube Type and these sacks arefinding great use in packaging of tea and their demand is on a high upsurge. All the new plants being installed in the country are adopting the energy efficient dry process, cost-effective foreign technology and sophisticated control systems. Other plans of the industry include modern material handling equipment mechanization of loading operations. Rotary packing plants and balancing equipments, vertical roller mills in place of tube mills installation of modern instrumentation and process control including x - ray analyzers. Out of various types of cement being produced and used in the country the production and demand for white cement is consistently increasing. Report Cost: Rupees Six Thousand Only or US$ 350/- OR Exausted Detailed Project Report Cost Rs. 10,000/- only with CD.

Cost Estimation

Plant Capacity 50000 Nos/Day

Land & Building (4000 sq.mt.) Rs. 1.05 Cr.

Plant & Machinery Rs. 35 Lacs

W.C. for 3 Months Rs. 1.62 Lacs

Total Capital Investment Rs. 3.08 Cr.

Rate of Return 40%

Break Even Point 34%