Detailed Project Report (DPR) on Domestic reverse osmosis filter’s cartridges and housing manufacturing unit (pp melt blown filter cartridge, carbon block filter cartridge, gac filter cartridge, pp string wound filter cartridge, tfc spiral wound membrane and ca

Detailed Project Report (DPR) on Domestic reverse osmosis filter’s cartridges and housing manufacturing unit (pp melt blown filter cartridge, carbon block filter cartridge, gac filter cartridge, pp string wound filter cartridge, tfc spiral wound membrane and ca
Code #3432
Original
India
Countries
Translation provided by Google AI

Industry Overview

Reverse Osmosis (RO) is a membrane-based water purification technology used to remove dissolved inorganic solids, salts, and a wide range of contaminants from water. The process works by applying pressure to force water through a semi-permeable membrane, allowing purified water to pass through while retaining dissolved impurities and other contaminants.

RO technology is based on the natural phenomenon of osmosis, in which water moves from a solution with a lower concentration of dissolved substances towards one with a higher concentration through a semi-permeable membrane. Reverse osmosis reverses this natural movement by applying external pressure.

The technology can remove several impurities commonly found in water, including fluoride, lead, chlorine, chloramine, pesticides, detergents, nitrates, and sulfates. An RO purification system generally consists of a sediment and chlorine pre-filter, a reverse osmosis membrane, a storage tank, and an activated carbon post-filter.

During operation, purified water, known as permeate, is collected on the clean side of the membrane, while concentrated contaminants are discharged through the concentrate stream. Reverse osmosis is particularly suitable for treating brackish water and water containing dissolved salts, nitrates, and other minerals that are difficult to remove using conventional treatment methods.

RO technology has applications in household drinking water purification and commercial water treatment. The industry also involves the manufacture of essential filtration components, including sediment cartridges, activated carbon filters, thin-film composite membranes, string-wound cartridges, and filter housings.

Cost Estimation

Plant Capacity 26100.00 Nos/day
Land & Building (4047 Sq.mt) Rs. 2.28 Cr
Plant & Machinery Rs. 2.79 Cr
Working Capital for 2 Months Rs. 63.89 Cr
Total Capital Investment Rs. 69.32 Cr
Rate of Return 44%
Break Even Point 26%

Content Index

  • INTRODUCTION
  • STAGES OF FILTRATION
  • TYPES OF FILTER USED IN REVERSE OSMOSIS PROCESS
  • (1) SEDIMENT FILTER (MELT BLOWN FILTER CARTRIDGE)
  • SIZES
  • MATERIALS OF CONSTRUCTION
  • APPLICATIONS
  • (2) ACTIVATED CARBON FILTER
  • WHAT IS ACTIVATED CARBON, HOW ACTIVATED CARBON IS MADE.
  • CLASSIFICATION OF ACTIVATED CARBON
  • TYPES OF ACTIVATED CARBON FILTER
  • (A) GRANULAR ACTIVATED CARBON
  • ADVANTAGES
  • DISADVANTAGES
  • THERE ARE TWO TYPES OF GAC FILTER SYSTEMS:
  • 1. WHOLE-HOUSE FILTERS OR POINT OF ENTRY:
  • 2. POINT OF USE FILTERS:
  • (B) CARBON BLOCK FILTER
  • ADVANTAGES
  • (3) THIN FILM COMPOSITE MEMBRANE FILTER (RO FILTER)
  • SPIRAL WOUND MODULE
  • CONSTRUCTION
  • HOW IT WORKS
  • DISADVANTAGES
  • ADVANTAGES
  • (4) PP STRING WOUND CRTRIDGE FILTER
  • MATERIALS OF CONSTRUCTION
  • SPECIFICATION:
  • APPLICATIONS
  • (5) FILTER HOUSING
  • USES AND APPLICATION
  • DRINKING WATER PRODUCTION
  • B.I.S. SPECIFICATION
  • PROCESS FLOW CHART
  • PRODUCTION PROCESS
  • (A) FOR MELT BLOWN FILTER
  • (B) GAC CARBON FILTER
  • (C) FOR CARBON BLOCK FILTER
  • OPERATION PROCEDURES:
  • (D) FOR THIN FILM COMPOSITE MEMBRANE ELEMENT
  • RAW MATERIALS:
  • MANUFACTURING PROCESS
  • THERE ARE THE MAIN THREE STEPS FOR MAKING TFC MEMBRANE
  • THE TECHNOLOGY FOR PREPARATION OF COMPOSITE POLYAMIDE REVERSE OSMOSIS (RO) MEMBRANE INVOLVES VARIOUS STEPS:
  • (1) PREPARATION OF CASTING SOLUTION (PSF SOL)
  • (2) PHASE INVERSION METHOD FOR PREPARATION SUPPORTING MEMBRANE (LAYER) (CASTING PROCESS)
  • IMMERSION PRECIPITATION
  • FACTORS AFFECTING MEMBRANE STRUCTURE
  • (A) ADDITION OF SOLVENT TO THE COAGULATION BATH
  • (B) POLYMER CONCENTRATION
  • (C) ADDITION OF NON-SOLVENT TO THE CASTING SOLUTION
  • (D) EVAPORATION TIME
  • (E) PORE-FORMING ADDITIVES
  • MEMBRANE POST-TREATMENT
  • (A) ANNEALING
  • (B) CROSSLINKING
  • (C) DRYING BY SOLVENT EXCHANGE
  • (3) PREPARATION OF POLYAMIDE ACTIVE LAYER (COATING PROCESS) ON SUPPORT LAYER COATING PROCESS
  • (A) DIP COATING
  • (B) INTERFACIAL POLYMERISATION
  • STEPS INVOLVED IN INTERFACIAL POLYMERIZATION
  • (4) ASSEMBLING PROCESS OF SPIRAL WOUND MEMBRANE CARTRIDGE
  • MARKET SURVEY
  • PRIVATE SECTOR EFFORTS IN PROVIDING CLEAN DRINKING WATER
  • WATER PURIFIERS MARKET
  • BUSINESS MODEL TO MARKET DRINKING WATER: SARVAJAL
  • INDIA WATER PURIFIER MARKET
  • INDIA WATER PURIFIER MARKET
  • GOVERNMENT INITIATIVES PUSH CONSUMERS TO INSTALL WATER PURIFIERS
  • RO WATER PURIFIERS WIN DOMINANT SHARE IN OVERALL MARKET
  • HOUSEHOLD CONSUMERS TO SHOW INTEREST IN WATER PURIFIERS DURING FORECAST PERIOD
  • WATER PURIFIER MARKET OVERVIEW:
  • SEGMENT REVIEW:
  • TOP FACTORS IMPACTING WORLD WATER PURIFIER MARKET
  • NEW PRODUCT DEVELOPMENT
  • DETERIORATING QUALITY OF WATER
  • RISING DEMAND FROM DEVELOPING ECONOMIES
  • MARKETING AND POSITIONING STRATEGIES
  • INCREASING NUMBER OF UNORGANIZED PLAYERS
  • INCREASING DEMAND OF SUBSTITUTES
  • KENT RO EXPECTS 22% OF GROWTH IN REVENUE IN 2018
  • BRIEF US ABOUT NEW DEVELOPMENTS AND THE EXPANSION PLANS OF KENT RO?
  • NEW DEVELOPMENTS
  • EXPANSION PLANS
  • HOW MUCH PROFITABLE IS YOUR OTHER PRODUCTS APART FROM WATER PURIFIER?
  • BRIEF US ABOUT YOUR MARKETING STRATEGIES.
  • HOW DO YOU PLAN TO COMPETE WITH OTHER BRANDS?
  • BRIEF US ABOUT YOUR REVENUE FORECAST AND IN NUMBERS WHAT IS YOUR EXPECTATION FOR THE COMING YEAR?
  • EUREKA FORBES OVERTAKES KENT IN RO WATER PURIFIER MARKET IN INDIA
  • PLANT LAYOUT
  • MANUFACTURERS/SUPPLIERS OF PP MELT BLOWN CARTRIDGE
  • MANUFACTURERS/SUPPLIERS OF STRING WOUND CARTRIDGE
  • MANUFACTURERS/SUPPLIERS OF CTO CARBON BLOCK AND GAC FILTER
  • SUPPLIERS OF TFC RO MEMBRANE
  • SUPPLIERS OF DOMASTIC RO FILTER HOUSING
  • SUPPLIERS OF RAW MATERIALS
  • POLY PROPYLINE GRANULES
  • SUPPLIERS OF ACTIVATED CARBON POWDER
  • SUPPLIERS OF ACTIVATED CARBON GRANULE
  • SUPPLIERS OF POLY ETHER SULPHONE
  • SUPPLIERS OF N-METHYL PYRROLIDONE
  • SUPPLIERS OF NON-WOVEN POLYSTER FABRIC
  • SUPPLIERS OF MPD
  • SUPPLIERS OF TRI METHYL CLORIDE
  • SUPPLIERS OF PLANT AND MACHINERY
  • SUPPLIERS OF DOMASTIC TFC RO MEMBRANE MAKING MACHINE
  • SUPPLIERS OF POLY SULPHONE CASTING AND COATING MACHINE
  • SUPPLIERS OF MEMBRANE LAB TEST EQUIPMENT
  • SUPPLIERS OF PP MELT BLOWN, PP STRING WOUND AND CARBON CTO AND GAC CARTRIDGE MAKING MACHINE
  • INJECTION MOLDING MACHINE
  • SUPPLIERS OF SPIRAL WOUND MEMBRANE ASSEMBLING PLANT
  • SUPPLIERS OF POWER TRANSFORMER
  • SUPPLIERS OF ELECTRICAL PANEL
  • SUPPLIERS OF COOLING TOWER
  • EFFULENT TREATMENT PLANT
  • AIR POLLUTION CONTROL EQUIPMENTS
  • AIR CONDITIONING EQUIPMENTS
  • AIR COMPRESSORS
  • PLATFORM WEIGHING MACHINE
  • MATERIAL HANDLING EQUIPMENTS
  • FIRE FIGHTING EQUIPMENTS
  • JIGS AND FIXTURE
  • SUBMERSIBLE WATER PUMP

Appendix

  • 1. COST OF PLANT ECONOMICS
  • 2. LAND & BUILDING
  • 3. PLANT AND MACHINERY
  • 4. FIXED CAPITAL INVESTMENT
  • 5. RAW MATERIAL
  • 6. SALARY AND WAGES
  • 7. UTILITIES AND OVERHEADS
  • 8. TOTAL WORKING CAPITAL
  • 9. COST OF PRODUCTION
  • 10. PROFITABILITY ANALYSIS
  • 11. BREAK EVEN POINT
  • 12. RESOURCES OF FINANCE
  • 13. INTEREST CHART
  • 14. DEPRECIATION CHART
  • 15. CASH FLOW STATEMENT
  • 16. PROJECTED BALANCE SHEET

Frequently Asked Questions

Reverse osmosis is a water purification process that removes dissolved salts and other contaminants using a semi-permeable membrane. Water is forced through the membrane under pressure, while most dissolved impurities are retained and discharged in a concentrated reject stream. The technology is widely used for drinking water purification, particularly where water contains excessive dissolved minerals, salts, nitrates, or other contaminants that conventional filtration methods may not adequately remove.

A reverse osmosis membrane separates purified water from dissolved contaminants through pressure-driven membrane filtration. Feed water is supplied under pressure to the membrane surface. Water molecules pass through its selective layer, while most dissolved salts, suspended impurities, and other contaminants are rejected. The purified output is called permeate, while the concentrated wastewater is called concentrate or reject water. Membrane performance depends on factors such as feed-water quality, operating pressure, temperature, and membrane condition.

The main filtration components used in an RO water purifier include sediment filters, activated carbon filters, and thin-film composite RO membranes. Sediment filters remove suspended particles, while activated carbon filters help reduce chlorine, organic compounds, and substances affecting taste and odour. The RO membrane removes a large proportion of dissolved salts and other contaminants. Additional components may include PP string-wound cartridges, filter housings, storage tanks, and activated carbon post-filters, depending on the system design.

Granular activated carbon filters contain loose activated carbon granules, whereas carbon block filters use activated carbon compressed into a solid block. Both types are used to reduce chlorine, certain organic compounds, and unwanted tastes and odours. Granular filters provide water contact with individual carbon particles, while carbon block filters generally offer a more compact filtration structure. Their effectiveness depends on carbon quality, filter design, contact time, water conditions, and the manufacturer's specifications.

Thin-film composite RO membranes are manufactured by preparing a porous polymer support layer and forming a selective polyamide active layer on its surface. The support membrane is commonly produced through a phase-inversion process using a polymer casting solution, followed by immersion precipitation and post-treatment. The active layer is generally formed through interfacial polymerisation. The finished membrane is subsequently processed, tested, and assembled into spiral-wound membrane cartridges for use in water purification systems.

RO filter and membrane manufacturing requires different raw materials depending on the product being manufactured. These may include polypropylene granules for melt-blown cartridges, activated carbon powder and granules for carbon filters, and polymers such as polysulfone for membrane support layers. Other materials identified in the manufacturing process include N-methyl pyrrolidone, non-woven polyester fabric, MPD, and trimethyl chloride. Appropriate material selection and quality control are essential for achieving consistent filtration performance and product reliability.

Reverse osmosis technology is primarily used for drinking water purification and the treatment of water containing dissolved salts and minerals. It is particularly useful for brackish water treatment and applications where nitrates, sulfates, and other dissolved substances need to be reduced. RO systems are used in household water purifiers as well as commercial and industrial water treatment installations. The technology is also supported by a manufacturing industry producing membranes, filter cartridges, activated carbon filters, housings, and associated purification equipment.

Why Choose Us

  • More than 45 years of experience
  • Managed by expert industrial consultants
  • ISO 9001-2015 Certified
  • Registered under MSME, UAM No: DL01E0012000

How We Work

  • 24/5 Research Support Get your queries resolved from an industry expert. Ask before you purchase.
  • Custom Research Service Speak to our consultants to design an exclusive study for your needs.
  • Quality Assurance All reports are prepared by qualified consultants & verified by experts.
  • Information Security Your personal & confidential information is always safe and secure.

Detailed Project Report (DPR) includes Present Market Position and Expected Future Demand, Technology, Manufacturing Process, Investment Opportunity, Plant Economics and Project Financials. comprehensive analysis from industry covering detailed reporting and evaluates the position of the industry by providing insights to the SWOT analysis of the industry.

Each report include Plant Capacity, requirement of Land & Building, Plant & Machinery, Flow Sheet Diagram, Raw Materials detail with suppliers list, Total Capital Investment along with detailed calculation on Rate of Return, Break-Even Analysis and Profitability Analysis. The report also provides a birds eye view of the global industry with details on projected market size and then progresses to evaluate the industry in detail.

We can prepare detailed project report on any industry as per your requirement.

We can also modify the project capacity and project cost as per your requirement. If you are planning to start a business, contact us today.

  • Market growth drivers
  • Factors limiting market growth
  • Current market trends
  • Market structure
  • Key highlights

  • Up-to-date analyses of market trends and technological improvements
  • Pin-point analyses of market competition dynamics to offer you a competitive edge over major competitors
  • An array of graphics, BEP analysis of major industry segments
  • Detailed analyses of industry trends
  • A well-defined technological growth with an impact-analysis
  • A clear understanding of the competitive landscape and key product segments

  1. Ask for FREE project related details with our consultant/industry expert.
  2. Share your specific research requirements for customized project report.
  3. Request for due diligence and consumer centric studies.
  4. Still haven't found what you're looking for? Speak to our Custom Research Team.

EIRI Board is a single destination for all the industry, company and country reports. We feature a large repository of latest industry reports, leading and niche company profiles, and market statistics prepared by highly qualified consultants and verified by a panel of experts.

Note: We can also prepare project report on any subject based on your requirement and country. If you need, we can modify the project capacity and project cost based on your requirement.

Our reports provide an expansive market analysis of the sector by covering areas like growth drivers, trends prevailing in the industry as well as comprehensive SWOT analysis of the sector.

Our Clients
Our Clients

  • Our research reports comprehensively cover Indian markets (can be modified as per your country), present investigation, standpoint and gauge for a time of five years*.
  • The market conjectures are produced on the premise of optional research and are cross-accepted through associations with the business players.
  • We use dependable wellsprings of data and databases, and data from such sources is handled by us and incorporated into the report.

  1. Our project reports include detailed analysis that helps get the industry's Present Market Position and Expected Future Demand.
  2. Offer real analysis driving variables for the business and the most recent business sector patterns in the industry.
  3. This report comprehends the present status of the business by clarifying a complete SWOT examination and investigation of the interest-supply circumstance.
  4. Report gives analysis and in-depth financial comparison of real players/competitors.
  5. The report gives estimates of key parameters which forecast business execution.

Ready to Start Your Industrial Business?

Speak with our experts and get personalized guidance for your manufacturing business idea, project planning, machinery selection, and investment strategy.

Our consultancy team will connect with you to understand your business requirements and guide you on the next steps.