Menu
Your Cart

    How To Start Metal (Ferrous & Non-Ferrous) Based Industry

    Putting it quite simply, non-ferrous metal are those, which do not have any iron in them. These can be non iron metals or alloys that don’t have a notable amount of iron. The examples can be many. Aluminum, copper, zinc, tin, and nickel are all non-ferrous metals. Alloys such as those containing brass, zinc and copper are also non-ferrous.

    Non-ferrous metals and alloys are used in very specific cases. Such as, when the weight requirement is low, more strength is needed, melting points need to be high and the end product needs to be resistant to its environment and chemicals.

    Also the non-ferrous metals have some electronic applications which are very distinct. Coppers and its alloys can be used to make rods, sheets, wires, forgings and various castings. Metals like zinc aren’t used alone too often. They can be used to create a pretty good coating though. When dipped in zinc, steel becomes much more durable and likely to survive longer.

    When it comes to the production of aluminum, our country ranks 5th. These metal affects our lives on a daily basis. Fortunately, we have no dearth of natural natural resources that can supply us with minerals. Be it gold, bauxite or chlorite.

    ALUMINIUM COMPOSITE PANEL[CODE NO.4072]   Aluminium Composite Panels (ACP) are mainly light-weight composite material consisting of two pre-finished aluminium cover sheets heat-bonded (laminated) to a core made of polyethylene plastic material, available in 3mm, 4mm, and 6mm thickn..
    US $ 0.00
    PRESSURE DIE CASTING (ALUMINIUM)[CODE NO.4048]    The pressure die casting processes consume almost twice as many tones of aluminium alloys as all other casting processes combined. These processes are especially suited to the production of large quantities of ..
    US $ 0.00
     ALUMINIUM SCRAP RECYCLING[CODE NO.3818]    Ingots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout its length. (In..
    US $ 0.00
     ERW ROLLING MILL [CODE NO.3868]    Electric resistance welded (ERW) pipe is manufactured by cold-forming a sheet of steel into a cylindrical shape. Current is then passed between the two edges of the steel to heat the steel to a point at which the edges are forced togeth..
    US $ 0.00
    ALUMINIUM ALLOY WHEEL[CODE NO.3973]    Wheel is a component that supports tire .Alloy wheels are wheels that are made from an alloy of aluminium. Aluminum alloy wheel is the second most popular wheel after steel one For the production of aluminum alloy wheel, A 356 A..
    US $ 0.00
     ALUMINIUM NOTCH BAR, SHOTS AND CUBES[CODE NO.3995]    Aluminum recycling is the process through which scrap aluminum is reprocessed to be used in products after its initial production. Aluminum producers and recyclers in the aluminum industry work with individuals, busin..
    US $ 0.00
    ALUMINIUM EXTRUSION AND ANODISING PLANT [CODE NO.3773] Extrusion Extrusion is a plastic deformation process in which a block of metal (billet) is forced to flow by compression through the die opening of a smaller cross-sectional area than that of the original billet Extrusion is an..
    US $ 0.00
    ALUMINIUM DROSS PROCESSING AND SCRAP MELTING UNIT [CODE NO.3699]   Ingots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout its ..
    US $ 0.00
    SILVER UTENSILS [CODE NO.3650] Silver Utensils are the high point in your crockery assortment. They add unmatched panache and luxury value to your collection. Be it the utensils for your infant or the fancy bowls that you take out for guests, each of your Silver Utensils is special for its o..
    US $ 0.00
    ALUMINIUM INGOT FROM ALUMINIUM SCRAP [3585] Ingots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout its length. (Ingot may have variabl..
    US $ 0.00
    ALUMINIUM CONDUCTORS MANUFACTURING FACTORY [3556] The development and strengthening of the country’s transmission and distribution (T&D) network has always been a key focus area. To this end, a number of government initiatives and programmes have been undertaken such as the Deendayal Upadhya..
    US $ 0.00
    ERW PIPES AND TUBES PLANT [CODE NO 3460] Electric resistance welded (ERW) pipe is manufactured by cold-forming a sheet of steel into a cylindrical shape. Current is then passed between the two edges of the steel to heat the steel to a point at which the edges are forced together to form..
    US $ 0.00
    Showing 1 to 12 of 197 (17 Pages)