POWDER MANUFACTURING UNIT
FOR PUREPOLYESTER & EPOXY
[CODE NO. 2063]
The success of powder coatings from its earliest beginnings in 1960’s is unmistakable. More than twenty years after they first entered the market powder coatings in the 80s has now become a commercial and technical success.
Powder can be described as solid paint. It is applied through special gun which electrically charges the particles and deposits them on to an earthed article. The charge allows the particles to remain adherent to the substrate and when baked the particles fuse together and cross link the polymers to form hard abrasion resistant coating.
There is an liner increasing variety of powder coatings to choose from and the final selection will depend on the end use and requirement of coated substrate.
The thermo setting system the polymer is a low molecular weight species which melts and flows decreasing fusion and undergoes to a thermoset cured condition. Once this condition has been achieved it can no longer be remelted to plastic condition.
The iron linking reaction occurs in thermosetting powders between the reactive group of resins like epoxy, polyester etc. and those of curing agents. To achieve a smooth film the polymers must flow out to a continuous and even film before cure is initiated.
Powder is in variably a composite, balancing the softening temperature with the melt viscosity or fusion characteristic and the speed of cross linking . The components required for manufacture of thermosetting powders are as follows :-
1. Polymers
2. Hardeners, Catalyst, Curing agents
3. Pigments, extenders
4. Flow control additives.
Resins having a softening point between 700C to 1100C are usually employed. Resins of lower melting point have tendency to 'Cake" in the powder form on storage and furthermore have very poor 'edge coverage'.
Alternatively those of higher melting point will give better 'edge coverage' but have very poor flow and 'Orange peel defect.
The applications curing and properties required in the coating influence the choice of curing agent to be used with the particular type of polymer to be used in the formulation.
The hardener should be unreactive at room temperature remaining latent at upto 100oC and should react fully below 1800C. The reaction should not be so rapid as to prevent complete flow out of the fused resins as this would lead to very poor flow of the powder.
COST ESTIMATION
Plant Capacity 4.00 Ton./day
Land & Building (3000 Sq.Mtr) Rs. 2.67 Cr
Plant & Machinery Rs.1.50 Cr
W.C. for 2 Months Rs. 4.90 Cr
Total Capital Investment Rs.9.27 Cr
Rate of Return 26%
Break Even Point 52%
• INTRODUCTION
• PROPERTIES
• USES AND APPLICATION
• B.I.S. SPECIFICATION
• MARKET POSITION
• CMEMISTRY OF POWDER COATINGS POLYMERS
• PRESENT MANUFACTURERS
• FORMULATION OF POWDER COATINGS
• MANUFACTURING PROCESS
• PROCESS FLOW SHEET FOR POWDER COATING MANUFACTURING
• APPLICATION TECHNIQUES
• ELECTROSTATIC FLUIDIZED BED
• PRINCIPLES OF PLANT LAYOUT
• PLANT LOCATION FACTORS
• EXPLANATION OF TERMS USED IN THE PROJECT REPORT
• PROJECT IMPLEMENTATION SCHEDULES
• PLANT LAYOUT
• SUPPLIERS of RAW MATERIALS
• SUPPLIERS OF PLANT AND MACHINERY
APPENDIX – A :
1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET
Why Choose Us
- More than 45 years of experience
- Managed by expert industrial consultants
- ISO 9001-2015 Certified
- Registered under MSME, UAM No: DL01E0012000
How We Work
- 24/5 Research Support Get your queries resolved from an industry expert. Ask before you purchase.
- Custom Research Service Speak to our consultants to design an exclusive study for your needs.
- Quality Assurance All reports are prepared by qualified consultants & verified by experts.
- Information Security Your personal & confidential information is always safe and secure.
Detailed Project Report (DPR) includes Present Market Position and Expected Future Demand, Technology, Manufacturing Process, Investment Opportunity, Plant Economics and Project Financials. comprehensive analysis from industry covering detailed reporting and evaluates the position of the industry by providing insights to the SWOT analysis of the industry.
Each report include Plant Capacity, requirement of Land & Building, Plant & Machinery, Flow Sheet Diagram, Raw Materials detail with suppliers list, Total Capital Investment along with detailed calculation on Rate of Return, Break-Even Analysis and Profitability Analysis. The report also provides a birds eye view of the global industry with details on projected market size and then progresses to evaluate the industry in detail.
We can prepare detailed project report on any industry as per your requirement.
We can also modify the project capacity and project cost as per your requirement. If you are planning to start a business, contact us today.
- Market growth drivers
- Factors limiting market growth
- Current market trends
- Market structure
- Key highlights
- Up-to-date analyses of market trends and technological improvements
- Pin-point analyses of market competition dynamics to offer you a competitive edge over major competitors
- An array of graphics, BEP analysis of major industry segments
- Detailed analyses of industry trends
- A well-defined technological growth with an impact-analysis
- A clear understanding of the competitive landscape and key product segments
- Ask for FREE project related details with our consultant/industry expert.
- Share your specific research requirements for customized project report.
- Request for due diligence and consumer centric studies.
- Still haven't found what you're looking for? Speak to our Custom Research Team.
EIRI Board is a single destination for all the industry, company and country reports. We feature a large repository of latest industry reports, leading and niche company profiles, and market statistics prepared by highly qualified consultants and verified by a panel of experts.
Note: We can also prepare project report on any subject based on your requirement and country. If you need, we can modify the project capacity and project cost based on your requirement.
Our reports provide an expansive market analysis of the sector by covering areas like growth drivers, trends prevailing in the industry as well as comprehensive SWOT analysis of the sector.
Our Clients
- Our research reports comprehensively cover Indian markets (can be modified as per your country), present investigation, standpoint and gauge for a time of five years*.
- The market conjectures are produced on the premise of optional research and are cross-accepted through associations with the business players.
- We use dependable wellsprings of data and databases, and data from such sources is handled by us and incorporated into the report.
- Our project reports include detailed analysis that helps get the industry's Present Market Position and Expected Future Demand.
- Offer real analysis driving variables for the business and the most recent business sector patterns in the industry.
- This report comprehends the present status of the business by clarifying a complete SWOT examination and investigation of the interest-supply circumstance.
- Report gives analysis and in-depth financial comparison of real players/competitors.
- The report gives estimates of key parameters which forecast business execution.