Industry Overview
Telescopic channels or drawer runners are mechanical components designed to provide smooth, guided opening and closing movement for drawers and similar applications. Typically mounted on the sides of drawers, these channels operate on ball-bearing slides and may incorporate features such as pull-out stops, roll-out guards, and soft-closing mechanisms. Depending on the design, telescopic channels can provide weight-carrying capacity of up to 50 Kg and are widely used in kitchen furniture and other storage applications.
The demand for telescopic channels is supported by their increasing application in drawers and equipment requiring controlled sliding movement. Their use in ATM machines, gaming machines, ticket machines, and food and drink dispensing equipment is projected to contribute to future demand. In addition, growing consumer purchasing power and economic development are supporting increased demand for premium furniture, which is expected to strengthen the use of telescopic channels in residential, commercial, and industrial applications worldwide.
Cost Estimation
| Particulars | Value |
|---|---|
| Plant Capacity | 28,000 Pcs/Day |
| Land & Building (2000 sq.mt.) | Rs. 1.58 Cr |
| Plant & Machinery | Rs. 9 Cr |
| Working Capital for 2 Months | Rs. 7.96 Cr |
| Total Capital Investment | Rs. 19.05 Cr |
| Rate of Return | 16% |
| Break Even Point | 68% |
Content Index
- INTRODUCTION
- CATEGORIES OF TELESCOPIC CHANNELS
- TELESCOPIC CHANNEL PRODUCT TYPE
- TELESCOPIC CHANNEL/RUNNER MATERIAL
- TELESCOPIC CHANNEL/RUNNER BY MOUNTING TYPE
- KEY FEATURES REQUIRED IN TELESCOPIC DRAWERS
- MATERIAL USED FOR MANUFACTURING OF TELESCOPIC DRAWER CHANNELS
- STAINLESS STEEL
- TYPE 302 STEEL
- IRON
- B.I.S. SPECIFICATION
- PROCESS FLOW CHART OF TELESCOPIC DRAWER CHANNEL MANUFACTURING
- MANUFACTURING PROCESS OF TELESCOPIC DRAWER CHANNEL
- ROLL FORMING PROCESS
- METAL CUTTING PROCESS
- RIVETING
- BENDING
- QUALITY CONTROL
- INCOMING INSPECTION
- FACTORY FLOOR PROCESS CONTROL
- FINAL INSPECTION
- PLANT AND MACHINERY
- DRAWER SLIDES ROLL FORMING MACHINE
- PROCESS OF SLIDES ROLL FORMING
- CUSTOMIZED ROLL FORMING LINES
- MARKET POSITION
- MARKET SIZE AND FORECAST (US$ MN)
- GLOBAL TELESCOPIC CHANNEL MARKET DRIVERS
- PESTEL ANALYSIS
- MARKET OUTLOOK
- KEY PLAYERS IN OPERATION
- PLANT LAYOUT
- PRINCIPLES OF PLANT LAYOUT
- MAJOR PROVISIONS IN ROAD PLANNING FOR MULTIPURPOSE SERVICE ARE:
- PLANT LOCATION FACTORS
- PRIMARY FACTORS
- 1. RAW-MATERIAL SUPPLY:
- 2. MARKETS:
- 3. POWER AND FUEL SUPPLY:
- 4. WATER SUPPLY:
- 5. CLIMATE:
- 6. TRANSPORTATION:
- 7. WASTE DISPOSAL:
- 8. LABOR:
- 9. REGULATORY LAWS:
- 10. TAXES:
- 11. SITE CHARACTERISTICS:
- 12. COMMUNITY FACTORS:
- 13. VULNERABILITY TO WARTIME ATTACK:
- 14. FLOOD AND FIRE CONTROL:
- EXPLANATION OF TERMS USED IN THE PROJECT REPORT
- 1. DEPRECIATION:
- 2. FIXED ASSETS:
- 3. WORKING CAPITAL:
- 4. BREAK-EVEN POINT:
- 5. OTHER FIXED EXPENSES:
- 6. MARGIN MONEY:
- 7. TOTAL LOAD:
- 8. LAND AREA/MAN POWER RATIO:
- PROJECT IMPLEMENTATION SCHEDULES
- INTRODUCTION
- PROJECT HANDLING
- PROJECT SCHEDULING
- PROJECT CONSTRUCTION SCHEDULE
- TIME SCHEDULE
- SUPPLIERS OF TELESCOPIC CHANNEL
- SUPPLIERS OF RAW MATERIALS
- SUPPLIER OF STEEL SHEET
- SUPPLIER OF BEARING BALLS
- SUPPLIERS OF PLASTIC STOPPERS AND OTHER SMALL ITEMS
- SUPPLIERS OF PLANT AND MACHINES
- SUPPLIERS TELESCOPIC DRAWER CHANNEL PRODUCTION LINE
- SUPPLIERS OF DG SETS
- SUPPLIERS OF POWER TRANSFORMERS
- SUPPLIERS OF MATERIAL HANDLING EQUIPMENTS
- SUPPLIERS OF FIRE FIGHTING EQUIPMENTS
- SUPPLIERS OF EXHAUST FAN
- SUPPLIERS OF TESTING EQUIPMENTS
Appendix
- APPENDIX – A:
- 01. PLANT ECONOMICS
- 02. LAND & BUILDING
- 03. PLANT AND MACHINERY
- 04. OTHER FIXED ASSESTS
- 05. FIXED CAPITAL
- 06. RAW MATERIAL
- 07. SALARY AND WAGES
- 08. UTILITIES AND OVERHEADS
- 09. TOTAL WORKING CAPITAL
- 10. TOTAL CAPITAL INVESTMENT
- 11. COST OF PRODUCTION
- 12. TURN OVER/ANNUM
- 13. BREAK EVEN POINT
- 14. RESOURCES FOR FINANCE
- 15. INSTALMENT PAYABLE IN 5 YEARS
- 16. DEPRECIATION CHART FOR 5 YEARS
- 17. PROFIT ANALYSIS FOR 5 YEARS
- 18. PROJECTED BALANCE SHEET FOR (5 YEARS)
Frequently Asked Questions
A telescopic drawer channel is a mechanical sliding component that enables drawers to open and close smoothly. It is generally installed along the sides of a drawer and operates using ball-bearing slides or similar mechanisms. The system provides guided linear movement and can incorporate features such as pull-out stops, roll-out guards, and soft closing. Telescopic channels are commonly used in furniture, kitchen cabinets, storage systems, and equipment requiring controlled sliding access.
Telescopic drawer channels can be manufactured using materials such as stainless steel, Type 302 steel, and iron, depending on the required performance and application. Material selection affects strength, corrosion resistance, durability, load-bearing performance, and manufacturing requirements. The choice should therefore consider the intended environment, drawer construction, required service life, surface finish, and applicable specifications. The project report specifically covers stainless steel, Type 302 steel, iron, and relevant B.I.S. specifications.
Telescopic drawer channels are manufactured through a sequence of metal forming, cutting, joining, and finishing operations. The report identifies roll forming, metal cutting, riveting, and bending as key manufacturing processes. Roll forming is used to produce the required channel profiles, while cutting establishes component dimensions. Riveting joins the relevant parts, and bending provides the required geometry. Quality control is incorporated through incoming inspection, factory floor process control, and final inspection.
Telescopic drawer channel production requires machinery suited to profile forming, component preparation, assembly, and quality testing. A key item identified in the report is the drawer slides roll forming machine, along with customized roll forming lines. Additional equipment depends on the manufacturing configuration and may support cutting, riveting, bending, material handling, testing, utilities, and plant services. The selection of machinery should be aligned with the required product specifications, production volume, automation level, material type, and quality requirements.
Telescopic channels are commonly used in furniture and equipment where smooth, guided sliding movement is required. They are widely associated with drawers in residential, commercial, and industrial applications, including kitchen furniture and storage systems. The report also identifies applications in ATM machines, gaming machines, ticket machines, and food and drink dispensing equipment. Their ability to provide controlled movement and convenient access makes them suitable for many applications involving horizontally or vertically guided components.
Demand for telescopic drawer channels is influenced by furniture consumption, equipment applications, product functionality, and broader economic conditions. Growing demand for premium furniture can increase the requirement for higher-functionality drawer systems in residential, commercial, and industrial settings. The expansion of equipment such as ATM machines, gaming machines, ticket machines, and dispensing equipment can also support demand. Product features such as load capacity, smooth operation, soft closing, durability, and mounting configuration further influence purchasing decisions.
Effective quality control in telescopic drawer channel manufacturing should cover raw materials, production processes, assembly, and finished products. The report identifies incoming inspection, factory floor process control, and final inspection as key quality-control stages. These checks help verify material quality, dimensional accuracy, forming consistency, assembly integrity, movement characteristics, and finished-product performance. Appropriate inspection procedures should be established according to product specifications, applicable standards, customer requirements, and the intended application of the telescopic channel.
Why Choose Us
- More than 45 years of experience
- Managed by expert industrial consultants
- ISO 9001-2015 Certified
- Registered under MSME, UAM No: DL01E0012000
How We Work
- 24/5 Research Support Get your queries resolved from an industry expert. Ask before you purchase.
- Custom Research Service Speak to our consultants to design an exclusive study for your needs.
- Quality Assurance All reports are prepared by qualified consultants & verified by experts.
- Information Security Your personal & confidential information is always safe and secure.
Detailed Project Report (DPR) includes Present Market Position and Expected Future Demand, Technology, Manufacturing Process, Investment Opportunity, Plant Economics and Project Financials. comprehensive analysis from industry covering detailed reporting and evaluates the position of the industry by providing insights to the SWOT analysis of the industry.
Each report include Plant Capacity, requirement of Land & Building, Plant & Machinery, Flow Sheet Diagram, Raw Materials detail with suppliers list, Total Capital Investment along with detailed calculation on Rate of Return, Break-Even Analysis and Profitability Analysis. The report also provides a birds eye view of the global industry with details on projected market size and then progresses to evaluate the industry in detail.
We can prepare detailed project report on any industry as per your requirement.
We can also modify the project capacity and project cost as per your requirement. If you are planning to start a business, contact us today.
- Market growth drivers
- Factors limiting market growth
- Current market trends
- Market structure
- Key highlights
- Up-to-date analyses of market trends and technological improvements
- Pin-point analyses of market competition dynamics to offer you a competitive edge over major competitors
- An array of graphics, BEP analysis of major industry segments
- Detailed analyses of industry trends
- A well-defined technological growth with an impact-analysis
- A clear understanding of the competitive landscape and key product segments
- Ask for FREE project related details with our consultant/industry expert.
- Share your specific research requirements for customized project report.
- Request for due diligence and consumer centric studies.
- Still haven't found what you're looking for? Speak to our Custom Research Team.
EIRI Board is a single destination for all the industry, company and country reports. We feature a large repository of latest industry reports, leading and niche company profiles, and market statistics prepared by highly qualified consultants and verified by a panel of experts.
Note: We can also prepare project report on any subject based on your requirement and country. If you need, we can modify the project capacity and project cost based on your requirement.
Our reports provide an expansive market analysis of the sector by covering areas like growth drivers, trends prevailing in the industry as well as comprehensive SWOT analysis of the sector.
Our Clients
- Our research reports comprehensively cover Indian markets (can be modified as per your country), present investigation, standpoint and gauge for a time of five years*.
- The market conjectures are produced on the premise of optional research and are cross-accepted through associations with the business players.
- We use dependable wellsprings of data and databases, and data from such sources is handled by us and incorporated into the report.
- Our project reports include detailed analysis that helps get the industry's Present Market Position and Expected Future Demand.
- Offer real analysis driving variables for the business and the most recent business sector patterns in the industry.
- This report comprehends the present status of the business by clarifying a complete SWOT examination and investigation of the interest-supply circumstance.
- Report gives analysis and in-depth financial comparison of real players/competitors.
- The report gives estimates of key parameters which forecast business execution.
