Aluminium Industry and Aluminium Extrusion, Wire Drawing, Aluminum Ingot, Aluminum Products, Cans, Sheet, Extruded Products, Profiles, Doors, Powder, Foil, Cone, Slug, Tubes, Bars, Conductor, Alloys, Coils, Extruded Rods, Sheets
ALUMINIUM COMPOSITE PANEL[CODE NO.4072] Aluminium Composite Panels (ACP) are mainly light-weight composite material consisting of two pre-finished aluminium cover sheets heat-bonded (laminated) to a core made of polyethylene plastic material, available in 3mm, 4mm, and 6mm thickn..
₹ 0 INR
PRESSURE DIE CASTING (ALUMINIUM)[CODE NO.4048] The pressure die casting processes consume almost twice as many tones of aluminium alloys as all other casting processes combined. These processes are especially suited to the production of large quantities of ..
₹ 0 INR
ALUMINIUM SCRAP RECYCLING[CODE NO.3818] Ingots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout its length. (In..
₹ 0 INR
ALUMINIUM ALLOY WHEEL[CODE NO.3973] Wheel is a component that supports tire .Alloy wheels are wheels that are made from an alloy of aluminium. Aluminum alloy wheel is the second most popular wheel after steel one For the production of aluminum alloy wheel, A 356 A..
₹ 0 INR
ALUMINIUM NOTCH BAR, SHOTS AND CUBES[CODE NO.3995] Aluminum recycling is the process through which scrap aluminum is reprocessed to be used in products after its initial production. Aluminum producers and recyclers in the aluminum industry work with individuals, busin..
₹ 0 INR
ALUMINIUM EXTRUSION AND ANODISING PLANT[EIRI/EDPR/3773] J.C.: 1867US$INTRODUCTIONExtrusionExtrusion is a plastic deformation process in which a block of metal (billet) is forced to flow by compression through the die opening of a smaller cross-sectional area than that of the original billet Extrusio..
₹ 0 INR
ALUMINIUM DROSS PROCESSING AND SCRAP MELTING UNIT[EIRI/EDPR/3699] J.C.: 1786INTRODUCTIONIngots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout..
₹ 0 INR
ALUMINIUM INGOT FROM ALUMINIUM SCRAP [3585]
Ingots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout its length. (Ingot may have variabl..
₹ 0 INR
ALUMINIUM CONDUCTORS MANUFACTURING FACTORY[EIRI/EDPR/3556] J.C.: 1643 INTRODUCTIONAluminium Conductors (i) All Aluminium Conducts (AAC) (ii) All Alloy Aluminium Conductors (AAAC), and (iii) Aluminium Conductors Steel Reinforced (ACSR) are used in Transmission and Distribution system to carry th..
₹ 0 INR
ALUMINIUM NOTCH BAR/CUBES/SHOTS MANUFACTURING UNIT FROM SCRAP CAP: 20 TPD
[CODE NO.3369]
Aluminum recycling is the process through which scrap aluminum is reprocessed to be used in products after its initial production. Aluminum producers and recyclers in the aluminum industry work with in..
₹ 0 INR
ALUMINIUM COMPOSITE PANELS (ACP)
WITHOUT COIL COATING
[CODE NO.3317]
Aluminium Composite Panels (ACP) are mainly light-weight composite material consisting of two pre-finished aluminium cover sheets heat-bonded (laminated) to a core made of polyethylene plastic material, available in ..
₹ 0 INR
ALUMINIUM EXTRUSION PLANT CAPACITY: 10 TON/DAY
[CODE NO.3279]
Extrusion is a plastic deformation process in which a block of metal (billet) is forced to flow by compression through the die opening of a smaller cross-sectional area than that of the original billet Extrusion is an indirect..
₹ 0 INR