All Products
PET RESIN
FROM ETHYLENE GLYCOL AND TEREPHTHALIC ACID
[CODE NO. 1776]
Poly (ethylene terephthalate), or PET, is a thermoplastic polyester resin. Such resins may be classified as low-viscosity or high-viscosity resins. Low-viscosity PET typically has an intrinsic viscosity of less than ..
₹ 0 INR
FORMALDEHYDE RESINS
(PHENOL (PF), MELAMINE (MF) & UREA (UF) RESINS)
[CODE NO. 1775]
Urea Formaldehyde Resin
Approximately 1 million metric tons of urea-formaldehyde resin are produced annually. More than 70% of this urea-formaldehyde resin is used by the forest products industry f..
₹ 0 INR
DISPOSABLE PLASTIC SYRINGES
(2 ml. and 5 ml. Size)
[CODE NO. 1774]
DISPOSABLE SYRINGE
Disposable Plastic Syringes are being used by doctors to inject medicines through Intravenous or intramuscular ways for the treatment of diseases & also by research &am..
₹ 0 INR
WHEAT FLOUR MILL CAP: 100 TPD (ATTA, MAIDA, SUJI AND BRAN)
[CODE NO.1773]
The plant will have facility to produce, Maida, Sooji, Atta and bran. These products will be sold as per the guidance issued for Food and Civil Supplies Department of the concerned state.
..
₹ 0 INR
READY TO EAT PREMIX FOOD
[CODE NO. 1772]
With a small beginning in 33 blocks in 1975, the Integrated Child Development Services (ICDS) Scheme, today, has become India’s flag shipprogramme for the integrated development of children from pre-natal to 6 years of age. It represents one of the w..
₹ 0 INR
NUTRICANDY
[CODE NO.1771] )
Nutri-candy is a sweet lozenge which has been given to children attending supplementary feeding centres. The results have been astonishing with very high compliance rates and a 15–50 per cent reduction in anaemia. The lozenges contain sugar, however, which c..
₹ 0 INR
uPVC WINDOWS FROM uPVC PROFILES
[CODE NO. 1770]
uPVC Windows are widely used across the globe, from the deserts of Arizona to the coldest parts of Scandinavia/Russia, from the hot environs of Gulf to the tropics of Malaysia, Thailand as well as very extensively in China, S. Korea, Ta..
₹ 0 INR
The book on IDENTIFICATION OF PLASTICS AND OTHER PLASTIC PROCESS INDUSTRIES (Polystyrene, Nylon, Thermoplastic Elastomer, Alkyd Resin, Polypropylene Plastics, Melamine Formaldehyde Resins, ABS, Plastic Blends, Polyvinylidene Chloride Plastics, Polymer, Pipes) covers Identification of Plastic Materi..
₹ 1,050 INR
BUS MANUFACTURING PLANT(LIKE VOLVO TYPE)
[CODE NO. 1761]
Bus is used as the most common public transport vehicle in our country. Different State Transport Undertakings are plying their buses for commuting public from one place to another and from one State to another. Apart from these Unde..
₹ 0 INR
PE GRASS MAT
[CODE NO. 1768]
Synthetic Grass Floor Mat is an innovation product of modern times to impart an elegant and fascinating look to the floor for which it is used in ordinately as a covering material.
Earlier other types of mats were used for floor ..
₹ 0 INR
SILICONE EMULSION (RELEASE AGENT) FOR TYPES OF INDUSTRIES
– RUBBER, PLASTIC, PU FOAMS
[CODE NO.1767]
Silicones are synthetic polymers having an inorganic skeleton of alternate silicone and oxygen atoms, the
silicone valencies not taken up by oxygen being saturated with orga..
₹ 0 INR
INDUSTRIAL PAINT AND INKS (VARIOUS TYPES)
[CODE NO. 766]
Organic coatings are composed of pigments suspended in a vehicle. The vehicle or carrier consists primarily of a resinuous of driers, plasticizers and stabilizers as required. As the paint film dries, these vehicles changes fro..
₹ 0 INR