Detailed Project Report on ceramic crockery ware (table wares)

CERAMIC CROCKERY WARE (TABLE WARES) (CERAMIC HOTEL WARE TABLE WARE BONE CHINA HITKARI TYPE)

[EIRI/EDPR/0684]J.C.:9292 

      The  materials may be taken separately to scales,located  at the  mixer  and the accurate proprtioning be done here  and  each ingredient  dumped into the receiver of the mixing mahine or  the batches  may  have been made up before hand in barrels  or  other containers and be dumped into the receiver of the mixing  machine or  the  batches may have been made up before hand  inbarrels  or other containers and be dumped as a whole into the mixer.

     Conveyors  truks or on rent may be used in  connection  with such system but automatic centinuity is broken whin ever  batches have to be introduced.

     The  consists  of a trough in which are rotating  two  screw bands,running  in  opposite directions. The  operator  stops  the machine  and opens the bottom gate by  a lever and  the  contents will  be discharged due to the outer screw delivering  into  this direction and due to the additional action of the arms above  the out let. It is intermittent.

     Crockery  is an item of daily necessity in every  house.  It includes  tea sets comprising of a kettle,cups  and  plates,sugar ot,milk pot and other items like full plates,half  plates,quarter plates,dongas  muggas etc. Apart from these items small  and  big size  dishes are also covered by the term crockery. These  dishes are used to contain sauce or other domestic acids.

     Crockery in fact is a very vast term which includes a number of  items all used in our homes. Wares and containers  made  from glass  are also covered under the term crockery. But to  be  more specific  we call it glass crockery and it has different  process of  manufacture than the variety made from eramics. This  project report described in detail the crockery items made from  ceramics only.

     The  crockery  industry  also  sometimes  called  the   clay products or silicate industries have as their finished  materials a  number  of articles that are essentially  silicates.  Products from  the  ceramic  industries  find  their  use  extensively  in ourhouse  and  in industries. The products may be  classified  as white  wares heavy clay products refractories,enamels and  glass. 

The white wares include china ware earthe were  pottery,porcelain vitreous ware and stoneware. china ware is the most useful  items and is used almost in all houses.

COST ESTIMATION

Rated Plant capacity         =                                                   1000 Sets/Day   

Land & Building (4000 Sq.Mtr)                                      Rs. 55.00 Lacs    

Plant & Machinery                                                                Rs. 44.25 Lacs 

Working Capital for 3 Month                                                Rs. 76.94 Lacs 

Total Capital Investment                                                      Rs. 1.93 Cr 

Rate of Return                                                                      52%

Break Even Point                                                                  53%

CONTENTS

1.   INTRODUCTION                                   

2.   PROPERTIES                                     

3.   USES AND APPLICATION                           

4.   B I S SPECIFICATION                            

5.   MARKET SURVEY                                  

6.   RAW MATERIALS DETAILS                          

7.   FORMULATIONS                                   

8.   PROCESS OF MANUFACTURE                         

9.   PROCESS FLOW DIAGRAM                           

10.  PLANT LAYOUT                                    

11.  PRINCIPLES OF PLANT LAYOUT                              

12.  PLANT LOCATION FACTORS                                    

13.  EXPLANATION OF TERMS USED IN THE PROJECT REPORT      

14.  PLANT & MACHINERY SUPPLIERS                      

15.  RAW MATERIALS SUPPLIERS                          

APPENDIX – A:

01. PLANT ECONOMICS

02. LAND & BUILDING

03. PLANT AND MACHINERY

04. OTHER FIXED ASSESTS

05. FIXED CAPITAL

06. RAW MATERIAL

07. SALARY AND WAGES

08. UTILITIES AND OVERHEADS

09. TOTAL WORKING CAPITAL

10. TOTAL CAPITAL INVESTMENT

11. COST OF PRODUCTION

12. TURN OVER/ANNUM

13. BREAK EVEN POINT

14. RESOURCES FOR FINANCE

15. INSTALMENT PAYABLE IN 5 YEARS

16. DEPRECIATION CHART FOR 5 YEARS

17. PROFIT ANALYSIS FOR 5 YEARS

18. PROJECTED BALANCE SHEET FOR (5 YEARS)