Detailed Project Report on aluminium door, windows & fittings

 ALUMINIUM DOOR, WINDOW AND FITTINGS
[CODE NO. 2274]

     Doors, windows and ventilators are essential component of all types of buildings - residential, commercial and  industrial. House building has been a need and beautifying the buildings  has been a love for mankind from the time immemorial. Doors are  used for  providing entrances from outside into the building  and  for inter  room  connections  for  easy  approach.  Ventilators   are provided  for  sun rays and light, into the dwelling  houses,  in sufficient  quantity  windows  play larger roles  in  the  entire building  construction  for enhancing the utility of  the  house. Windows  are  provided  in  building walls in  as  many  nos.  as possible. This is so because windows serve in a lot  many  ways. Most  of  the  air passage takes places  through  these  windows. Similarly, light and sun get entry through windows quite freely. Windows  provide  cross  ventilation in  many  cases.  All  these conditions are essential for human conforts. Outsiders enter into the  house  through  the doors but the  doors  are  opened  after looking  at  the entrance through windows and  after  ascertaining that the outsider could be allowed to enter.

     Windows are kept closed or open or curtained according to the need depending on weather conditions and other factors.

     Windows have kept on occuping an important place in every type of  building.  These  are  manufactured  out  of  different materials  in  different design and sizes. Earlier  windows  were made  of  wood,  then  shifted to iron  and  steel  and  then  to aluminium and brass etc. Modern windows are made of wood, metals and plastics.  With the shortage of wood, the metilic windows complete  with supporting frames have become very  much  popular. They  are cheaper than wooden window frames, available in  ready made  condition and   are more attractive and  highly  durable. Plastics, on the other hand, are attractive and cheap but not  as durable as metallic window frames.

     Both   ferrous  and  non-ferrous  metals  are   useful   for manufacturing window frames. Metallic frames are mass-provided in engineering  industries  and provide open gaps for  fixing  glass panes of various sizes to make it transparent. Securing the glass in the metal window frame is termes as glazing with the aid of strips  of metal or timber and putty. The glass pieces are fixed with various techniques to the metallic window frames e.g. fixing single  units, fixing composite units etc. Normal conditions  are observed while fixing and glazing.


COST ESTIMATION

Plant Capacity                                    ALUMINIUM DOORS & WINDOWS & FITTING
                               
Land & Building (450 Sq.Mtr)              Rs. 12.70 Lacs   
Plant & Machinery                                 Rs. 12.57 Lacs    
W.C. for 3 Months                                 Rs. 29.47 Lacs
Total Capital Investment                     Rs. 57.23 Lacs          
Rate of Return                                      34%  
Break Even Point                                  45%

1.        INTRODUCTION                                 
2.        USES AND APPLICATIONS                       
3.        BIS SPECIFICATIONS                           
4.        PROPERIES                                   
5.        MARKET SURVEY                                
6.        PRESENT MANUFACTURERS OF
          ALUMINIUM DOORS AND WINDOWS                   
7.        PRESENT MANUFACTURERS OF
          ALUMINIUM DOORS AND WINDOW  FITTINGS         
8.        PROCESS OF MANUFACTURE                       
9.        PULS AND HANDLE                              
10.       HINGES                                      
11.       ALDROPS AND SLIDING BOLTS                    
12.       PRICESS FLOW DIAGRAM                         
13.       SUPPLIERS OF MACHINERY                       
14.       SUPPLIERS OF RAW MATERIAL                    
    
APPENDIX – A :

 1.      COST OF PLANT ECONOMICS      
 2.      LAND & BUILDING                                      
 3.      PLANT AND MACHINERY                                  
 4.      FIXED CAPITAL INVESTMENT                             
 5.      RAW MATERIAL                                         
 6.      SALARY AND WAGES                                     
 7.      UTILITIES AND OVERHEADS                              
 8.      TOTAL WORKING CAPITAL                                
 9.      COST OF PRODUCTION                                   
10.      PROFITABILITY ANALYSIS                               
11.      BREAK EVEN POINT                                     
12.      RESOURCES OF FINANCE                           
13.      INTEREST CHART                                       
14.      DEPRECIATION CHART                                   
15.      CASH FLOW STATEMENT                                   
16.      PROJECTED BALANCE SHEET