Detailed Project Report on deep freezer

DEEP FREEZER

[ITI/DPR/1507] J.C. 293

INTRODUCTION

A freezer is a compartment whose temperatures range between -12 to -9 °C or even lower. This compartment is often found as part of a fridge or on its own. It is used for preserving food such as meat or for making ice cream.

They  are available in sizes ranging from about 4 cubic ft. over  20 cubic ft. Unless you have a very large kitchen area, this type of freezer is often stored in the garage or basement, due to its  size.

This type of freezer opens from the top, which means that cold air is retained well, due to the fact that cold air falls downwards rather than upwards.

Therefore this machine is cheaper to run, as less cold air is lost when the freezer door is opened.

On the downside, due to the shape and size, it is slightly more difficult to organise the contents, see what is inside and reach inside to clean or remove items, especially if you are short. For this type of freezer that is able to hold much more, an inventory and some kind of organization is essential.

Chest freezers are supplied with removable baskets, which are useful to store smaller products and to separate different types of foods. It is also possible to buy extra baskets, which would improve organization further.

Chest freezers must be manually defrosted, as they are not available in a frost free  model. Although defrosting must be done manually and takes more of an effort. it is required less frequently and it is more cost effective.

Chest freezers maintain the quality of the frozen food better and for longer and although the size and shape may be a disadvantage, they are cheaper to buy and more economical to run. Newer models are equipped with a fast freeze option high temperature warning system and the best models are of the highest energy efficiency grade (A++).

COST ESTIMATION

Plant Capacity            100 Units/Day  

Land & Building (2000 sq.mt.)    Rs. 99.50 Lac    

Plant & Machinery                    Rs. 88.36 Lac 

Working Capital for 2 Months    Rs. 8.29 Cr 

Total Capital Investment          Rs. 10.47 Cr 

Rate of Return                          114%

Break Even Point                      21%

CONTENTS

INTRODUCTION

USES

BIS SPECIFICATION

MARKET SURVEY

PRESENT MANUFACTURERS OF DEEP FREEZERS

MANUFACTURING PROCESS

SHEET METAL PARTS

TEST PROCEDURE

DISCUSSION OF TEST RESULTS

PLANT LAYOUT

PRINCIPLES OF PLANT LAYOUT

PLANT LOCATION FACTORS

EXPLANATION OF TERMS USED IN THE PROJECT REPORT

PROJECT IMPLEMENTATION SCHEDULES

SUPPLIERS OF PLANT & MACHINERY AND RAW MATERIALS

APPENDIX – A:

01. PLANT ECONOMICS

02. LAND & BUILDING

03. PLANT AND MACHINERY

04. OTHER FIXED ASSESTS

05. FIXED CAPITAL

06. RAW MATERIAL

07. SALARY AND WAGES

08. UTILITIES AND OVERHEADS

09. TOTAL WORKING CAPITAL

10. TOTAL CAPITAL INVESTMENT

11. COST OF PRODUCTION

12. TURN OVER/ANNUM

13. BREAK EVEN POINT

14. RESOURCES FOR FINANCE

15. INSTALMENT PAYABLE IN 5 YEARS

16. DEPRECIATION CHART FOR 5 YEARS

17. PROFIT ANALYSIS FOR 5 YEARS

18. PROJECTED BALANCE SHEET FOR (5 YEARS)